Flat repair
#3
Well, I guess we need a little more information. What caused the flat?? Which tire?? How many miles are on the tire with the flat?? Personally, I would never repair a tire with a nail or screw if it were my front tire. If it were my back tire, I may repair it but I'd never ride it as if the tire were undamaged. Best bet, replace the tire and be done with it. It's not just worth the consequences. Just my humble opinion.
By the way, I've riden with a tire with three plugs in it before and kept the tire through normal wear out. Lucky I guess, it was the back tire and money was tight at the time. Now I'd just replace the tire.
By the way, I've riden with a tire with three plugs in it before and kept the tire through normal wear out. Lucky I guess, it was the back tire and money was tight at the time. Now I'd just replace the tire.
Last edited by CSMHOG; 06-19-2013 at 01:24 PM.
#4
Hands down.
http://www.stopngo.com/tubeless-punc...scooters-atvs/
Just used mine for the first time last weekend after it being in my bike 4 1/2 years. I was very impressed and even though it was on a bud's tire I felt safe it would hold perfect for the 130 miles we needed to go. and only $65 for everything needed less a pair of pliers.
Adam
http://www.stopngo.com/tubeless-punc...scooters-atvs/
Just used mine for the first time last weekend after it being in my bike 4 1/2 years. I was very impressed and even though it was on a bud's tire I felt safe it would hold perfect for the 130 miles we needed to go. and only $65 for everything needed less a pair of pliers.
Adam
#5
Hands down.
http://www.stopngo.com/tubeless-punc...scooters-atvs/
Just used mine for the first time last weekend after it being in my bike 4 1/2 years. I was very impressed and even though it was on a bud's tire I felt safe it would hold perfect for the 130 miles we needed to go. and only $65 for everything needed less a pair of pliers.
Adam
http://www.stopngo.com/tubeless-punc...scooters-atvs/
Just used mine for the first time last weekend after it being in my bike 4 1/2 years. I was very impressed and even though it was on a bud's tire I felt safe it would hold perfect for the 130 miles we needed to go. and only $65 for everything needed less a pair of pliers.
Adam
#7
Trending Topics
#8
I just had a flat rear tire, tubeless, and on a tire with no more than 500 miles on it...
In Chicago, and we have the 2 mph expressways during rush hours, so I usually hit the shoulder and do at least 30 or so there.
Of course, that's where the debris settles and I must have caught a wicked looking 1 1/2 inch long stainless screw, looked like.
Tried to find a tire in a shop locally, all they had in-stock was Dunlops, which I refuse to use. I love the Michelin Commander II's. So until I could order the new one (I'm a stickler about tires...) I went ahead and patched, so I could ride for that weekend and this week.
So I did a smaller patch with the pull-stem that pulls through the nail-hole, after abrading and gluing the surface first.
Then did a larger patch over it.
Burned the excess glue and talcum over it . (I have the DynaBeads for wheel balancing, so can't let the glue stick them)
By the way, since I mentioned the DynaBeads, I'm pretty sure they're the reason I didn't wobble all that much when I caught the flat. I detected a wobble at 70 mph, only when I changed lanes etc, riding the side of the partly deflated tire, nothing when I was going straight. A *BIG* difference in handling from my last flat, that damm near threw me off the bike. So aside from they're working as expected, I now *really* like them.
But I'm pretty sure if I wanted to ride the Michelin Commander I repaired, it would hold. I started out babying it and now had put another 500 miles on it, with no issues at all, and will probably do another 4 to 500 before this Friday, when I'm off work and can change it. If I wasn't so **** about tires, I'd be fine with it. A plug? Not so much.
In Chicago, and we have the 2 mph expressways during rush hours, so I usually hit the shoulder and do at least 30 or so there.
Of course, that's where the debris settles and I must have caught a wicked looking 1 1/2 inch long stainless screw, looked like.
Tried to find a tire in a shop locally, all they had in-stock was Dunlops, which I refuse to use. I love the Michelin Commander II's. So until I could order the new one (I'm a stickler about tires...) I went ahead and patched, so I could ride for that weekend and this week.
So I did a smaller patch with the pull-stem that pulls through the nail-hole, after abrading and gluing the surface first.
Then did a larger patch over it.
Burned the excess glue and talcum over it . (I have the DynaBeads for wheel balancing, so can't let the glue stick them)
By the way, since I mentioned the DynaBeads, I'm pretty sure they're the reason I didn't wobble all that much when I caught the flat. I detected a wobble at 70 mph, only when I changed lanes etc, riding the side of the partly deflated tire, nothing when I was going straight. A *BIG* difference in handling from my last flat, that damm near threw me off the bike. So aside from they're working as expected, I now *really* like them.
But I'm pretty sure if I wanted to ride the Michelin Commander I repaired, it would hold. I started out babying it and now had put another 500 miles on it, with no issues at all, and will probably do another 4 to 500 before this Friday, when I'm off work and can change it. If I wasn't so **** about tires, I'd be fine with it. A plug? Not so much.