Help
Thread Starter
|
Stage I
Joined: May 2012
Posts: 1
Likes: 0
From: Phoenix AZ
Help
Hi my name is William and I live in Phoenix AZ. I have a 1999 FXD with the 95 inch kit in it and I have a 2011 FLHTK.
I can't seem to fix the FXD. When it gets warmed up (about 30 to 45 min) it starts to quit and back fire. it keeps getting worse until I stop and let it cool down. It has a new TC88 Dynatek module, new CPS, new coil, new regulator, new battery, new plugs and wires, new intake flanges and seals, and the carb has been rebuilt, and I just replaced the fuel valve and screen, and a new main breaker.
I am at the end of what I can do. Has anyone had this problem and if so what did you do to make it run right.
Any suggestions would be greatly appreciated.
I can't seem to fix the FXD. When it gets warmed up (about 30 to 45 min) it starts to quit and back fire. it keeps getting worse until I stop and let it cool down. It has a new TC88 Dynatek module, new CPS, new coil, new regulator, new battery, new plugs and wires, new intake flanges and seals, and the carb has been rebuilt, and I just replaced the fuel valve and screen, and a new main breaker.
I am at the end of what I can do. Has anyone had this problem and if so what did you do to make it run right.
Any suggestions would be greatly appreciated.
Tourer
Joined: Mar 2012
Posts: 352
Likes: 0
From: Texas
The thing I would try first is contact the mod support line and ask if they have heard of there mod doing this. Then I would check voltage in bat if mod checks out!! Look for bad ground to, just some ideas but it seems that every time someone post like this it's n the mod maybe bad or wire not just right!!
Welcome to the forums, hope you find what you need!
__________________
General Inquiries:
Info@LongRideShields.com
Sales and Marketing:
Sales@LongRideShields.com
Phone:
775.331.3789
General Inquiries:
Info@LongRideShields.com
Sales and Marketing:
Sales@LongRideShields.com
Phone:
775.331.3789
Welcome from sunny Southern California
