Harley Davidson Forums
0 2017/07/29 14:48:36
0 2017/09/27 19:16:46
0 2017/12/23 14:59:27
0 2017/12/26 12:10:27
Starting with a piece of 4"
Starting with a piece of 4"
0 2018/01/09 20:15:42
Parting off the adaptor.
Parting off the adaptor.
0 2018/01/09 20:15:59
Six holes to drill.
Six holes to drill.
0 2018/01/09 20:16:17
Adaptor almost ready , counter bored , three to be threaded.
Adaptor almost ready , counter bored , three to be threaded.
0 2018/01/09 20:16:34
adaptor and velocity stack , from the same peice of 4"
adaptor and velocity stack , from the same peice of 4"
0 2018/01/09 20:16:54
Trial fit of the first three parts , more work to do .......
Trial fit of the first three parts , more work to do .......
0 2018/01/09 20:17:16
0 2018/01/09 20:20:40
0 2018/01/13 11:18:46
0 2018/01/13 11:19:05
0 2018/01/13 11:19:25
0 2018/01/13 11:19:45
Valve train coming apart
Valve train coming apart
0 2018/01/21 09:07:51
Checking crank runout (.0025")
Checking crank runout (.0025")
0 2018/01/21 09:10:57
0 2018/01/21 09:11:31
It came with high capacity needle bearings , I'm changing them anyways , new cams - always = new bearings
It came with high capacity needle bearings , I'm changing them anyways , new cams - always = new bearings
0 2018/01/21 09:11:53
pulling the old bearings
pulling the old bearings
0 2018/01/21 09:12:11
installing the new bearings
installing the new bearings
0 2018/01/21 09:13:37
on break now..................
on break now..................
0 2018/01/21 09:15:31
0 2018/01/24 05:23:01
0 2018/01/24 05:23:25
0 2018/01/24 05:23:47
Sanding n' blending ....
Sanding n' blending ....
0 2018/01/27 18:23:54
a bit more to do ......
a bit more to do ......
0 2018/01/27 18:24:26
0 2018/01/27 18:25:20
getting close to done sanding
getting close to done sanding
0 2018/01/27 18:25:36
I've had that swivelling fixture since 1981 !
I've had that swivelling fixture since 1981 !
0 2018/01/27 18:28:01
some progress today
some progress today
0 2018/01/28 17:56:52
Close to being ready for valve seat re-facing
Close to being ready for valve seat re-facing
0 2018/01/28 17:57:13
Throttle body smoothed and blended
Throttle body smoothed and blended
0 2018/01/28 17:58:05
Grinding the seats (multiple angles)
Grinding the seats (multiple angles)
0 2018/02/03 17:24:17
Re-facing the valves
Re-facing the valves
0 2018/02/03 17:24:36
Checking the spring tension at the measured installed height as well as at full lift
Checking the spring tension at the measured installed height as well as at full lift
0 2018/02/03 17:24:56
checking installed height
checking installed height
0 2018/02/03 17:25:18
Had to make a valve seal installed
Had to make a valve seal installed
0 2018/02/03 17:25:39
newly made tool !
newly made tool !
0 2018/02/03 17:25:58
Chaecking valve travee & seal clearance
Chaecking valve travee & seal clearance
0 2018/02/03 17:26:15
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
© 2026 MH Sub I, LLC dba Internet Brands