Harley Davidson Forums
Good to go
Good to go
0 2018/02/03 17:26:37
Mmm , dry film coated pushrod tubes
Mmm , dry film coated pushrod tubes
0 2018/02/03 17:27:00
0 2018/02/04 06:39:53
0 2018/02/04 06:41:11
0 2018/02/09 05:19:59
I took a couple of hours to carefully carve this away, initially I was gonna go with a bunch of 1/4" slots , that changed three sizes of windows.
I took a couple of hours to carefully carve this away, initially I was gonna go with a bunch of 1/4" slots , that changed three sizes of windows.
0 2018/02/10 16:04:54
Sanded and glass beaded
Sanded and glass beaded
0 2018/02/10 16:05:13
Sprayed with Harley Wrinkle paint , jerks at the dealership charge $30 / can !!!
Sprayed with Harley Wrinkle paint , jerks at the dealership charge $30 / can !!!
0 2018/02/10 16:05:33
The hand crafted part of all of this that inspired a higher flowing cover.........
The hand crafted part of all of this that inspired a higher flowing cover.........
0 2018/02/10 16:05:50
0 2018/02/10 16:06:10
0 2018/02/10 16:09:36
0 2018/03/10 07:45:21
0 2018/03/10 07:52:05
0 2018/03/10 08:01:42
0 2018/03/21 18:01:32
0 2018/03/21 18:01:55
0 2018/03/24 15:09:17
Hand crafted intake for my 58mm screamin eagle throttle body
Hand crafted intake for my 58mm screamin eagle throttle body
0 2018/03/28 17:43:30
S&S cover , extra thick filter element
S&S cover , extra thick filter element
0 2018/03/28 17:44:25
0 2018/04/01 12:48:50
0 2018/04/01 12:49:17
0 2018/05/23 05:02:23
I have one of the Jim's fork leg tools , it's cool butit needed a block of aluminum bolted on to grip it in the vise to hold forks both horizontally and vertically
I have one of the Jim's fork leg tools , it's cool butit needed a block of aluminum bolted on to grip it in the vise to hold forks both horizontally and vertically
0 2019/01/19 12:53:06
there's a couple of fork tube holders I made in this drawer
there's a couple of fork tube holders I made in this drawer
0 2019/01/19 12:53:48
this is at the installed hieght
this is at the installed hieght
0 2019/02/03 10:10:48
0 2019/02/07 16:55:20
0 2019/03/23 09:33:37
0 2019/03/23 14:17:49
A man needs stuff to do on the weekend , in the winter.
A man needs stuff to do on the weekend , in the winter.
0 2019/03/24 07:47:06
Years ago when I worked at the dealership, I reverse engineered a bunch of Kent Moore tools , here's the timken bearing race tool I made . It works on big twins or little twins .
Years ago when I worked at the dealership, I reverse engineered a bunch of Kent Moore tools , here's the timken bearing race tool I made . It works on big twins or little twins .
0 2019/03/24 07:48:52
This is a timken bearing mock up tool to establish endplay and select the correct spacer. Surprisingly , most Timken bearing sets are good to go out of the box but I check em anyways.
This is a timken bearing mock up tool to establish endplay and select the correct spacer. Surprisingly , most Timken bearing sets are good to go out of the box but I check em anyways.
0 2019/03/24 07:49:45
The Timken race tool .
The Timken race tool .
0 2019/03/24 07:54:03
Installing the crank/bearing to the left case
Installing the crank/bearing to the left case
0 2019/03/24 07:55:09
0 2019/03/24 07:56:28
This one gets new valve seats , guides , springs , valves , rocker arms n' shafts
This one gets new valve seats , guides , springs , valves , rocker arms n' shafts
0 2019/03/24 07:59:07
Guides and seats in ...
Guides and seats in ...
0 2019/03/24 08:00:36
Carbide reamer / bronze guides
Carbide reamer / bronze guides
0 2019/03/24 08:02:10
Sometimes I make tools , some times I buy them
Sometimes I make tools , some times I buy them
0 2019/03/24 08:05:05
0 2019/03/24 08:41:07
A buddy wanted to use an earlier 5 speed tapered mainshaft trans in a chopper and use a later starter . I set it up , fully assembled of course wwith the mainshaft verticle , on that 3 in 1 and bored the starter hole to the correct size.
A buddy wanted to use an earlier 5 speed tapered mainshaft trans in a chopper and use a later starter . I set it up , fully assembled of course wwith the mainshaft verticle , on that 3 in 1 and bored the starter hole to the correct size.
0 2019/03/26 17:52:20
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
© 2026 MH Sub I, LLC dba Internet Brands