WS6 style air cleaner cover
.
.
Dug out my football from the bottom of the barrel today
and proceeded to extract the nice part and shitcan the remainder.
Makes for a very nice, cheap, simple change.
As far as I know, WS6 Formula was the first to perform
the operation a year or so ago.
A friend is shipping his StreetBob cover for me to do,
so I figured I might as well get a headstart and use
my own as a guinea pig.
I may go ahead a run it for awhile. Looks pretty good.
mud
12/18/2009 - edit to add link to step by step How To.....
.
https://www.hdforums.com/forum/2909122-post642.html
.
.
.
.

Last edited by mud; Oct 8, 2015 at 01:09 PM. Reason: ...add link to Video
BTW, Thanks for the jiffy stand question. I got it swapped out.
[IMG]local://upfiles/18946/D99DFB9157EC42F69AE32B7A5C4837A3.jpg[/IMG]
Trending Topics
Looks great mud, what did you use to trim the football cover off?
**************************************************
I used a thin 2" cutoff wheel in my high speed die grinder.
First I identified the target for cut,
thenmarked with a blue felt tip pen.
After the center was separated, I nutted this onto
a short piece of 3/8" all thread, then chucked it up
in my drill press and used my 4" sander to size it down
to the blue line, while spinning in the drill press.
Lotsa ways to skin a cat.
That's how I did it.
Details please, mud.
************************************************
BTW, Thanks for the jiffy stand question.
I got it swapped out.
https://www.hdforums.com/m_837591/tm.htm
That is where I got the basics.
Formula used a slightly different technique.
Good deal on the kStand.
Where's the pix??
pCoated black??
mud

The Best of Harley-Davidson for Lifelong Riders
The bike looks sharp. Have a good thanksgiving guys



