Did some work today on the bike
Thread Starter
|
Club Member
Joined: Nov 2007
Posts: 4,474
Likes: 6
From: Port Charlotte, Florida
Did some work today on the bike
Well another cold day in ohio. So i got the bike all washed up and started putting on all the goodies i got for xmas.
Installed the following:
1) Skull HD timing cover
2) Skull HD Derby cover
3) Voltage reg cover
4) Skull Battery cover band, Holy crap it took some pulling and heat to get the factory superglide band off. and i didn't know there was a battery tender cable under there **** dad got me one for xmas going to take it back.
5)Lay down license plate bracket with signal relocator package. Almost done just have to heat shrink the wiring and connect back up at the tail light.
6) I drilled the laydown bracket so i could mount my plate with the skull nut and bolt set i got for xmas
7) Detachable sissy bar brackets and upright and pad along with a Skull medalion. Only thing left is i have to get two Chrome bolts as the hardware set did not come with them.
Was a good day got alot done still have to do my front signal relocation but will wait to do that until i get everything else done.
I do like the laydown plate and the signals and i have the chrome skull tailight cover to put on also.
Installed the following:
1) Skull HD timing cover
2) Skull HD Derby cover
3) Voltage reg cover
4) Skull Battery cover band, Holy crap it took some pulling and heat to get the factory superglide band off. and i didn't know there was a battery tender cable under there **** dad got me one for xmas going to take it back.
5)Lay down license plate bracket with signal relocator package. Almost done just have to heat shrink the wiring and connect back up at the tail light.
6) I drilled the laydown bracket so i could mount my plate with the skull nut and bolt set i got for xmas
7) Detachable sissy bar brackets and upright and pad along with a Skull medalion. Only thing left is i have to get two Chrome bolts as the hardware set did not come with them.
Was a good day got alot done still have to do my front signal relocation but will wait to do that until i get everything else done.
I do like the laydown plate and the signals and i have the chrome skull tailight cover to put on also.
Thread Starter
|
Club Member
Joined: Nov 2007
Posts: 4,474
Likes: 6
From: Port Charlotte, Florida
RE: Did some work today on the bike
Thanks thats my dad's house he loves his shop no doubt. We hung out today and worked on my bike i keep it at his place over the winter only 5min down the road. Big garage lifts, big screen, my tools and his tools are there and oh ya free beer at his place lol.
What trouble you having? I haven't hooked up my wires yet iam going to cover them in heat shrink then solder the extensions on then heat shrink them etc finish that tomorrow maybe. But tomorrow is beer day when i get off work.
What trouble you having? I haven't hooked up my wires yet iam going to cover them in heat shrink then solder the extensions on then heat shrink them etc finish that tomorrow maybe. But tomorrow is beer day when i get off work.
Thread Starter
|
Club Member
Joined: Nov 2007
Posts: 4,474
Likes: 6
From: Port Charlotte, Florida
RE: Did some work today on the bike
Got all my wiring soldered up and heat shrinked put in place and tested. All looks good on the rear turn signals and tail light.
And man that laydown license turn signals and chrome skull tailight cover really cleans up the tail end and makes it look good. Now going to get some red turn signal coveres to clean it up some more.
And man that laydown license turn signals and chrome skull tailight cover really cleans up the tail end and makes it look good. Now going to get some red turn signal coveres to clean it up some more.
Advanced
Joined: Apr 2006
Posts: 94
Likes: 0
From:
RE: Did some work today on the bike
looks good ohio skelly i also installed my christmass goodies yesterday man those chrome switches for the turn signals ect. are a ba$tard to install well cant wait for summer im from pennsylvania so i fell your pain about the cold winter days i hope every one had a great new years day
Thread
Thread Starter
Forum
Replies
Last Post
