guys with bagger apes
6' and have the 12" Yaffe Monkey Bars. My seat height is a lot lower than stock so they would be comparable to a 15-16" bar though. While I love the looks and feel of the bars is I had it to do over I would go wth the Cyclesmith 13" bars they don't cost near as much and they are actually 12"s where your hands are. A local buddy has them on his bike and we compared the bars. The Yaffe bars are 13"s at hand height both were measured from the bottom of the bars.
Cruiser
Joined: Aug 2007
Posts: 162
Likes: 0
Just remember if your bars put your hands higher than your shoulders your heart is
gonna have work a little more to pump the blood up there, I would think you would loose
a little high-speed cornering ability to, how do you ride, just cruise around or do you hit
some twisties every now and then, and do you mind your bars having some flex to them?
because 18 or 20 inches you can really flex around, I like my bars to be solid and
responsive, you might want to install long extension wires that way if you change the bars
to taller you won't have to re-do the wires.
gl
gonna have work a little more to pump the blood up there, I would think you would loose
a little high-speed cornering ability to, how do you ride, just cruise around or do you hit
some twisties every now and then, and do you mind your bars having some flex to them?
because 18 or 20 inches you can really flex around, I like my bars to be solid and
responsive, you might want to install long extension wires that way if you change the bars
to taller you won't have to re-do the wires.
gl
Guest
Posts: n/a
thanks to all the advise so far! to answer your question shadowrunner i ride a preaty good mix of a types of roads. some would prob say i ried hard as well. i do enjoy the twistes and wouldnt want to sacrifice control in both high and low speed cornering. i have to say my mind is deef made up to go with apes now i just have to decide which of the two bars will work best for me. if anyone has anymore input say it cuz i like to know as much as i can about things like this when making a decision to ensure i make the beest one the first time
Road Warrior
Joined: Aug 2006
Posts: 1,779
Likes: 71
16" on all my bikes last 25 yrs, some were hand made. Im 5-8 no problems.........
http://i105.photobucket.com/albums/m...ure062-1-1.jpg
http://i105.photobucket.com/albums/m...ure062-1-1.jpg
Tourer
Joined: Feb 2008
Posts: 273
Likes: 0
From: Stafford, Va.
Yaffe 13" Apes
I'm 6' and I am running the 13" Paul Yaffe Apes on my 2008 SG. I love them. They are just below shouler height and very comfortable. You can order these bars with all the cables, lines and wiring included, even the fluids if you choose to do so.
Road Captain
Joined: Aug 2008
Posts: 538
Likes: 0
From: Charlotte, NC
I overheard a guy at the dealership tell a guy it was like an 8 hour job including hiding the cables & wiring inside the bars.
It was something like a thousand bucks all said & done.
I'd have to want them pretty bad to shell out THAT much!
Seasoned HDF Member
Joined: Jun 2005
Posts: 12,946
Likes: 32
From: Colorado Springs, CO
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
Harley-Davidson Fat Boy Becomes a Dark, Decepticon-Inspired Custom
Verdad Gallardo
6 Weirdest Harley-Davidsons Ever Sold to the Public
Verdad Gallardo
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Supporter
Joined: Jul 2007
Posts: 2,196
Likes: 10
From: Shenandoah, TX
One thing I and others failed to mention is,when you have the bars off,change the bushing to the urathane ones.It will make the bars more solid and responsive.I didn't lose any control at high speed or in the twisties with my 13".I've read on here where some people changed the bar clamps to a one piece instid of the two piece.I couldn't find one so used the stock clamps and haven't had any probs after 10,000 miles yet.It took me two days to do mine.I was by myself and didn't get in any hurry.Its not hard,just time consumming.2 six packs should get you thru it.