Touring Models Road King, Road King Custom, Road King Classic, Road Glide, Street Glide, Electra Glide, Electra Glide Classic, and Electra Glide Ultra Classic bikes.
Sponsored by:
Sponsored by:

PCV installation on 2011 Road KIng ...HELP ?

Thread Tools
 
Search this Thread
 
  #1  
Old 08-12-2011, 10:13 PM
Buckinfitch's Avatar
Buckinfitch
Buckinfitch is offline
Supporter
Thread Starter
Join Date: Jul 2009
Location: Taylortucky, MI
Posts: 13,870
Received 4,081 Likes on 1,514 Posts
Default PCV installation on 2011 Road KIng ...HELP ?

ready to do a stage 1 w/PCV, BUB 7 TDX's, and an Arlen Ness 'BIG SUCKER'...

schreeeeeching halt when PCV tail connector does not match to anything close near the ECM or anywhere in the area?, gave Fuel Moto correct info year, model etc, and Jamie even mapped it for the above installs? no problem with the gray clip connector going into the ECM but nothing not even close matching up to the other connector?, I looked all over..pulled both side panels, nothing ? followed the OEM connection from the ECM up to under the gas tank only to find spaghetti and no matching connector for the tail connection coming off the PCV.

anyone else with s a PCV installed on a 2011 FLH, maybe chime in ?, maybe they sent wrong PCV, it is the one pictured that I received....I'm stymied?

 
  #2  
Old 08-12-2011, 10:19 PM
drukanfu's Avatar
drukanfu
drukanfu is offline
Supporter
Join Date: Aug 2008
Location: N.E. Wisconsin
Posts: 5,189
Likes: 0
Received 16 Likes on 6 Posts
Default

Just guessing, but it might be tucked in behind the battery. Hope this helps.
 
  #3  
Old 08-12-2011, 10:27 PM
SICKBAGGER's Avatar
SICKBAGGER
SICKBAGGER is offline
Road Master
Join Date: Nov 2008
Location: Central Coast CA
Posts: 1,066
Likes: 0
Received 3 Likes on 3 Posts
Default

ya keep digging if it is not in the side covers then it is down in the battery area Jamie would not sent you the wrong one the connecter is the same on most that I have seen.
 
  #4  
Old 08-12-2011, 11:27 PM
Buckinfitch's Avatar
Buckinfitch
Buckinfitch is offline
Supporter
Thread Starter
Join Date: Jul 2009
Location: Taylortucky, MI
Posts: 13,870
Received 4,081 Likes on 1,514 Posts
Default

Originally Posted by Buckinfitch
ready to do a stage 1 w/PCV, BUB 7 TDX's, and an Arlen Ness 'BIG SUCKER'...

schreeeeeching halt when PCV tail connector does not match to anything close near the ECM or anywhere in the area?, gave Fuel Moto correct info year, model etc, and Jamie even mapped it for the above installs? no problem with the gray clip connector going into the ECM but nothing not even close matching up to the other connector?, I looked all over..pulled both side panels, nothing ? followed the OEM connection from the ECM up to under the gas tank only to find spaghetti and no matching connector for the tail connection coming off the PCV.

anyone else with s a PCV installed on a 2011 FLH, maybe chime in ?, maybe they sent wrong PCV, it is the one pictured that I received....I'm stymied?

according to this from instruction sheet for 2011 touring models it should be there?

see FIG:2 bottom left (I do not have?)
http://www.powercommander.com/downlo.../eng15-011.pdf


 
  #5  
Old 08-13-2011, 12:00 AM
MR.JIM's Avatar
MR.JIM
MR.JIM is offline
Intermediate
Join Date: Mar 2011
Location: TOMS RIVER, NJ
Posts: 45
Likes: 0
Received 0 Likes on 0 Posts
Default

Disconnect the harness from the ECM, take the harness u just unplugged and plug it into the circled connector on the picture of the PCV, take the connector with the gray lock on the PCV and plug it into the ECM. Done!
 
  #6  
Old 08-13-2011, 12:04 AM
MR.JIM's Avatar
MR.JIM
MR.JIM is offline
Intermediate
Join Date: Mar 2011
Location: TOMS RIVER, NJ
Posts: 45
Likes: 0
Received 0 Likes on 0 Posts
Default

you will also have to relocate that rectangular box into the right side cover and relocate that red capped connector someplace to make room for the tucked PCV connector.
 
  #7  
Old 08-13-2011, 12:05 AM
vickers1's Avatar
vickers1
vickers1 is offline
Road Warrior
Join Date: Jun 2006
Location: Southeast GA
Posts: 1,993
Likes: 0
Received 20 Likes on 11 Posts
Default

Originally Posted by MR.JIM
Disconnect the harness from the ECM, take the harness u just unplugged and plug it into the circled connector on the picture of the PCV, take the connector with the gray lock on the PCV and plug it into the ECM. Done!
That's it. There are no other connectors. It goes inline with your computer harness.
 
  #8  
Old 08-13-2011, 12:12 AM
MR.JIM's Avatar
MR.JIM
MR.JIM is offline
Intermediate
Join Date: Mar 2011
Location: TOMS RIVER, NJ
Posts: 45
Likes: 0
Received 0 Likes on 0 Posts
Default

Im just guessing but you DO know that you haveto use the PCV in conjunction with the factory ECM, im only saying that because I dont see your ECM in the picture from under your seat.
 
  #9  
Old 08-13-2011, 12:26 AM
Buckinfitch's Avatar
Buckinfitch
Buckinfitch is offline
Supporter
Thread Starter
Join Date: Jul 2009
Location: Taylortucky, MI
Posts: 13,870
Received 4,081 Likes on 1,514 Posts
Default

Originally Posted by MR.JIM
Disconnect the harness from the ECM, take the harness u just unplugged and plug it into the circled connector on the picture of the PCV, take the connector with the gray lock on the PCV and plug it into the ECM. Done!
ahhh... that's the trick, errr ticket, piggyback\loop it in?
I feel like a schmuck with major brain gas ... that was easy,

I came to the right place... this forum rocks and so do folks like you .... Thanks !!!

Originally Posted by MR.JIM
Im just guessing but you DO know that you haveto use the PCV in conjunction with the factory ECM, im only saying that because I dont see your ECM in the picture from under your seat.
yes, stock ECM is sitting on the seat off to the side,
 
  #10  
Old 08-13-2011, 06:05 AM
dohadex's Avatar
dohadex
dohadex is offline
Road Captain
Join Date: Sep 2009
Location: Panama City, FL
Posts: 719
Likes: 0
Received 1 Like on 1 Post
Default

I love a happy ending...!!!
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
brawner11
Sportster Parts
2
08-22-2014 08:45 AM
SO Fatbob
General Harley Davidson Chat
0
08-27-2011 08:36 PM
The Q
Touring Models
2
05-21-2011 05:41 PM
RCS
Fuel Moto / Jackpot Mufflers
3
04-07-2011 11:19 PM
motorsgt8
Touring Models
6
08-29-2010 10:05 PM



Quick Reply: PCV installation on 2011 Road KIng ...HELP ?



All times are GMT -5. The time now is 07:56 PM.