Harley Davidson Forum

Fatboy Rims

  Printable Version
Harley Davidson Forum >> This 'n' That >> Detailing >> Fatboy Rims Page: [1]
Login
Message << Older Topic   Newer Topic >>
Fatboy Rims - 4/13/2008 6:00:44 PM   
bayxter

 

Posts: 4
Joined: 4/13/2008
Status: offline
I just bought a 94 Fatboy, and the previous owner neglected the rims terribly.  I would just buy new ones, but these have the fatboy emblem laser cut around the rim, so I'd like to salvage them.  The restoration process is taking me especially long around the rivets that line the perimeter of the rims.  Can those be removed?


Thumbnail Image



Attachment (2)
Post #: 1
RE: Fatboy Rims - 4/17/2008 12:00:31 PM   
fxstcguy98


Posts: 1179
Joined: 1/16/2006
From: Columbus, OH
Status: offline
fxstcguy98's photo gallery
It looks like the p.o. had access to a machine shop, those may be press fit plugs, might be jbwelded in place. Best thing to do would be to contact the p.o. and see if he thinks they can be removed or not. I don't understand why someone would spend that kind on money on machine work and then just let it corrode.

_____________________________



EITHER GET A CLUE OR GET OUT OF THE F@#KING PASSING LANE!

(in reply to bayxter)
Post #: 2
RE: Fatboy Rims - 4/25/2008 5:31:58 PM   
bayxter

 

Posts: 4
Joined: 4/13/2008
Status: offline
Turns out they were 8mm 12 point chrome bolts.  30 on each side of the front and back rims.  I've been riding without them while I clean them up.  The PO bought the bike with those rims, and he let em go to sht.  Thanks for the reply.

(in reply to bayxter)
Post #: 3
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
Harley Davidson Forum >> This 'n' That >> Detailing
Jump to:



Featured Sponsors
Advertising Info

New Vendors
Warehouse Direc
Baker Drive Train
Haulen Ass
Pickard USA
Harley Goodies
Pickard USA
AMSOIL - Performance Oil Technology
Brain Bucket Magazine
HDForums.com Sponsors
AMSOIL - Performance Oil Technology

HDForums.com is not affiliated with or endorsed by Harley Davidson, Inc.