Daymaker questions
Thread Starter
|
Cruiser
Joined: Oct 2013
Posts: 165
Likes: 5
From: Oklahoma
Daymaker questions
I recently bought daymaker headlight and axillary lights. Axillary lights plug and play just fine. The headlight doesn't. I bought the adaptor but it doesn't plug into the headlight. The headlight has 4 prongs coming out of the back. Is there another adaptor to use? I can't seem to find one. This light came out of a '14 Limited and I'm putting it into my '14 SG. The light is an old part number it seems. 67700060
Any ideas?
Any ideas?
Thread Starter
|
Cruiser
Joined: Oct 2013
Posts: 165
Likes: 5
From: Oklahoma
I bought an adaptor for it but there has to be another one for this to work. The back of the light has a male connector that contains 4 prongs. The adaptor I bought is the one that most have said you need. It connects to the harness inside the fairing and then has the standard female three whole connector that fits onto the light.
Seasoned HDF Member
Joined: Jan 2005
Posts: 5,857
Likes: 2,506
From: Lake Orion, MI
Road Captain
Joined: Apr 2014
Posts: 628
Likes: 129
From: Mn
Thread Starter
|
Cruiser
Joined: Oct 2013
Posts: 165
Likes: 5
From: Oklahoma
both of those are basically the same and that's what I purchased. This daymaker is a HD one but has a very different type of a connection on the back. I'll take a pic and try to post it here in a few. Surely someone has ran across this before.
Thread Starter
|
Cruiser
Joined: Oct 2013
Posts: 165
Likes: 5
From: Oklahoma
Trending Topics
Seasoned HDF Member
Joined: Apr 2015
Posts: 10,034
Likes: 5,308
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo
Thread Starter
|
Cruiser
Joined: Oct 2013
Posts: 165
Likes: 5
From: Oklahoma
part number on the box says 69200897 and on the part itself is 69200881. It looks to me like the adaptor end and the back of the light itself is the same connection. It looks exactly the same but I know that end of the adaptor is suppose to connect inside the fairing. Maybe I don't need an adaptor? I'll have pull the light out and look I guess.
Last edited by ScoobyDooHarley; Jul 17, 2016 at 12:20 PM.
Thread Starter
|
Cruiser
Joined: Oct 2013
Posts: 165
Likes: 5
From: Oklahoma
That was it. I don't need an adaptor for my setup. I just unplugged the harness going to the original headlight and plugged the remaining part (in the fairing) to the Daymaker and it works like a champ. Who knew....... Thanks for all the replies. It helped me work though it and figure it out. I guess I have a late model adaptor for sale now.