Please help!!!!
Thread Starter
|
6th Gear
Joined: May 2014
Posts: 10
Likes: 0
From: Maine
Please help!!!!
I have a 2014 street glide that I just put yaffe 12" original bagger apes on got the job all wrapped up and nothing works!!!!! The fuel pump runs and the blinkers light up but the radio doesn't come on and neither do the gauges what could this be????
Road Warrior
Joined: Apr 2010
Posts: 1,542
Likes: 5
From: Cleveland, OH
Has to be something simple, I'd also retrace your connections and fuses like others have suggested.
Trending Topics
I just installed apes on my '14 SGS a couple weeks ago and had the same exact problem. Turns out the left side plug wasn't seated quite right inside the fairing and the switches on the right side assembly weren't seated all the way also. When I plugged the wires back in after feeding through the handlebars I did not push the plugs all the way into the switch assembly. So as everyone else has said it is a connection problem. Check the switch assembly on both side to make sure the plugs are seated properly then inside the fairing check the plugs there as well. Your TBW wouldn't affect the gauges, radio, blinker etc. only your throttle. Found that out the hard way as the cable I bought from Namz had a bad wire in their harness so no throttle. They overnighted a replacement and no more issues.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
