Passenger footpegs
Thread Starter
|
3rd Gear
Joined: Jun 2019
Posts: 7
Likes: 1
From: Las Vegas
Passenger footpegs
Going to purchase and install passenger footpegs on my 18 Slim. I get that I have to purchase the passenger footpeg support kit at $100 (not sure yet if there is an aftermarket replacement for that) https://www.harley-davidson.com/store/passenger-footpeg-support-kit-pa-07-50500769--1 but then I cannot find a footpegs set that fit the 18 Slim for less than $85 on the Harley website. What happen to the affordable good old rubber footpegs; don't need no fancy ***** G. skull stuff or similar... I found these on the Harley website but according to Harley, they don't fit the 18 Slim (see link) https://www.harley-davidson.com/store/large-cushioned-footpeg-kit?source_cd=SEM_Shop_PLA#tabs. Is the thickness of the male part thinner? If that's it, I probably can put some washers to get back to specs. Anyone tried this?
Cruiser
Joined: Apr 2017
Posts: 103
Likes: 51
From: Crookwell Australia
I have just gone through the process of changing the footpegs on a 2018 Fatboy and purchased the adaptors from DK Customs to enable you to fit any footpeg you wish.
They work well and are very affordable
They work well and are very affordable
Thread Starter
|
3rd Gear
Joined: Jun 2019
Posts: 7
Likes: 1
From: Las Vegas
Going to be doing the same soon; no issue to install the right passenger peg? Looks like there is not not much room behind the slide that bolt in that new frame.
Cruiser
Joined: Apr 2017
Posts: 103
Likes: 51
From: Crookwell Australia
have seen other installs on models and the HD support mounts are a common fit
Thread
Thread Starter
Forum
Replies
Last Post
P'colaHarley-17RGS
Softail Models
6
May 27, 2012 10:04 PM
