When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I still have the problem. It kind of goes away if I've been on the highway for a little while. When I get off the highway and stop at a red light, the noise is barely there. However, the noise comes back in full force very quickly.
I'm reluctant to take the bike to a dealership because I fear it would be a waste of time. I'm going to live with the noise for a little longer to see if it'll go away. It it does not, then I'll look into trying to do something about it myself. I don't know anything about removing brake pads and rotors though. The extent of my meager mechanical skills is changing the oil on my car.
As Tozco said, this noise really takes the fun out of riding.
I still have the problem. It kind of goes away if I've been on the highway for a little while. When I get off the highway and stop at a red light, the noise is barely there. However, the noise comes back in full force very quickly.
I'm reluctant to take the bike to a dealership because I fear it would be a waste of time. I'm going to live with the noise for a little longer to see if it'll go away. It it does not, then I'll look into trying to do something about it myself. I don't know anything about removing brake pads and rotors though. The extent of my meager mechanical skills is changing the oil on my car.
As Tozco said, this noise really takes the fun out of riding.
And I also explained how to banish the noise for ever.
I wonder if this is the same low speed sound prevalent among 2018+ softails in other threads. In the other threads I am talking about, it looks like they are zeroing in on the belt and rear wheel aligement as causes for the wah wah wah sound.
I have lost all faith that the dealer or HD can address and fix the front brake moaning problem; it is getting worse, not better, after the 1k miles service. But, I found a video on You Tube that is right on point, particularly if your bike/brakes are new. It recommends and shows how to apply Permatex 24129 Silicone Brake Parts Lubricant to the metal side of the brake pads and the retaining pin(s) that holds it/them in place. Anyone tried this fix?
The Permatex lubricant is available on-line from Amazon for only about $8, delivered. Ordered some today and will let you know how it works. I want to try this possible solution before spending the money to replaced the brake pads.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.