When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I ordered the 4 pull back risers from Harley. I already had a reach seat out on, but Im still slouching too much with the stock risers and I needed something a smidge taller and closer. If these dont work, Im going to see about adding a Kraus raptor or T. rex pullback plate under the risers.
I went with 6 risers. Then later changed to the narrow beach bars to get about 1 more pull in. Clutch cable is fine. Electrical wires a little tight but ok. Had to change the brake cable to whats used on the heritage.
Guys I am on the same path. I've just put it off as I have been working on the stage 3 and sprocket & pulley change. Looking forward to reading about your results and thoughts. Moose felix how tall are you guys?
Guys I am on the same path. I've just put it off as I have been working on the stage 3 and sprocket & pulley change. Looking forward to reading about your results and thoughts. Moose felix how tall are you guys?
Im 58 and while I can reach the stock bar set up and flatfoot just fine, I want to sit more upright and I have to slouch to reach the bars. I also have a reduced reach seat on that site me a little lower and a little closer
Just installed the HD 6 inch pull back risers. Everything worked except the brake line. Ordered the line from a Deluxe because they already have risers. Reach is much better.
I went from the Harley 4 risers to Chubby 10 drag bars and now the riding position is perfect for my 58 height. air had to change the brake line but everything else fit just fine.
I went from the Harley 4 risers to Chubby 10 drag bars and now the riding position is perfect for my 58 height. air had to change the brake line but everything else fit just fine.
can you show how you fit on it? Sorry if thats a weird request but if the 4 risers dont work I am tempted to do the same thing. I like a little bend in my elbow and dont want anything that puts my arms straight out or too high.
can you show how you fit on it? Sorry if thats a weird request but if the 4 risers dont work I am tempted to do the same thing. I like a little bend in my elbow and dont want anything that puts my arms straight out or too high.
I dont have any photos with me on the bike but I will attempt to get one, right now I have a slight bend in the elbow and my hands are just below shoulder height.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.
