"Heavy" Breather Filter Element
Thread Starter
|
Tourer
Joined: Apr 2008
Posts: 404
Likes: 1
From: Athens, Georgia
"Heavy" Breather Filter Element
Guys, Does anyone (other than HD) make a filter element that will fit on a Heavy Breather set-up. I checked in the "Summit" racing catalog for an auto/K&N filter but couldn't find the right size. I may be "Stuck" with buying from HD. Thanks in Advance for your help.
Outstanding HDF Member
Joined: Mar 2008
Posts: 2,456
Likes: 11
From: PacNW; Beacon of Conservatism in a Sea of Liberals.......AZ Snowbird; Just another Conservative
K & N sells a fit...lemme find it and I'll edit this post in a few minutes...
Here's their table... http://www.knfilters.com/search/univcone.aspx
I think it's this one... http://www.knfilters.com/search/prod...x?Prod=RC-4160
When I first looked for an exact replacement, I looked at the 2.5" dia. flange sizes...close, but no match. Their specs say the rubber flange can stretch up to 1/16" (.0625"), so I checked the next smaller flange size (2.438") and found the RC-4160 had the right dimensions to closely match the stock element. DO DOUBLECHECK ME, as I'm going from memory.
Here's their table... http://www.knfilters.com/search/univcone.aspx
I think it's this one... http://www.knfilters.com/search/prod...x?Prod=RC-4160
When I first looked for an exact replacement, I looked at the 2.5" dia. flange sizes...close, but no match. Their specs say the rubber flange can stretch up to 1/16" (.0625"), so I checked the next smaller flange size (2.438") and found the RC-4160 had the right dimensions to closely match the stock element. DO DOUBLECHECK ME, as I'm going from memory.
Last edited by PKellyMc; Mar 11, 2010 at 06:10 AM. Reason: Added info.
Thread
Thread Starter
Forum
Replies
Last Post
galaxyfe
Ignition/Tuner/ECM/Fuel Injection
4
Dec 23, 2014 09:29 PM
luc.who
Touring Models
1
Feb 17, 2011 02:13 PM
