Look what arrived today!
Thread Starter
|
Road Master
Joined: Mar 2015
Posts: 904
Likes: 62
From: Denver Colorado
Originally Posted by Gnarl78
What setting is the middle position in the crossovers?
Last edited by Greatsteaks; Apr 9, 2016 at 01:02 PM.
Thread Starter
|
Road Master
Joined: Mar 2015
Posts: 904
Likes: 62
From: Denver Colorado
Originally Posted by Bertk
It's good to see they packaged them up well for the journey.
I would let then break in for a couple of hours. You shouldn't need to go much over half volume with the KRC's. I would turn AVC off also.
I would let then break in for a couple of hours. You shouldn't need to go much over half volume with the KRC's. I would turn AVC off also.
Ultimate HDF Member
Joined: Mar 2008
Posts: 5,788
Likes: 203
From: SW Florida
On page 3 (in the less than helpful users manual) Focal recommends: " We recommend that once the system is ready for listening the drive units should be run-in with medium volume setting, with music that has full bandwidth of frequencies (sub-bass through to treble). This running-in period should be used for a few weeks, to gain the full potential. After which the excellent performance of you K2 Power products can be fully appreciated." Wow...
Ultimate HDF Member
Joined: Mar 2008
Posts: 5,788
Likes: 203
From: SW Florida
On the Focal 165KRC's, there is no documentation on tweeter settings. The settings are printed on the circuit board. The -6 is impossible to see with the cover on because it's hidden under wires. So here are some pics of the settings.
Pic 1: 0dB
Pic 2: -3dB
Pic 3: -6dB
Pic 1: 0dB
Pic 2: -3dB
Pic 3: -6dB
Road Captain
Joined: Dec 2008
Posts: 671
Likes: 7
thanks Bert,I looked for instruction manual ,nothing,don't really show how to move the tweeters,I left them alone,didn't want to break anything,anyways thanks
Ultimate HDF Member
Joined: Mar 2015
Posts: 6,446
Likes: 873
From: TEXAS
Originally Posted by Bertk
Received the same package today.
On page 3 (in the less than helpful users manual) Focal recommends: " We recommend that once the system is ready for listening the drive units should be run-in with medium volume setting, with music that has full bandwidth of frequencies (sub-bass through to treble). This running-in period should be used for a few weeks, to gain the full potential. After which the excellent performance of you K2 Power products can be fully appreciated." Wow...
On page 3 (in the less than helpful users manual) Focal recommends: " We recommend that once the system is ready for listening the drive units should be run-in with medium volume setting, with music that has full bandwidth of frequencies (sub-bass through to treble). This running-in period should be used for a few weeks, to gain the full potential. After which the excellent performance of you K2 Power products can be fully appreciated." Wow...
T.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
