Lower speaker parts list
Thread Starter
|
Cruiser
Joined: Dec 2017
Posts: 107
Likes: 11
From: Northern Illinois
Lower speaker parts list
Just trying to see which parts list is correct for a Rushmore lower vented non cooled.
I saw a old parts list from BERTK from 2016 but the install link was broken. The Harley install list has a bunch of different parts needed.
BERTK'S
Vivid Black speaker boxes PN: 76000497DH $280
Speaker Enclosure left & right PN: 76000368/76000369 $41 each
Gasket seal, adhesive-backed (2) PN: 25700311
Captive nut (8) PN: 10100064
CVO speaker grills PN: 76000065 $31 each
Grill screws PN: 10200105 (10) $4.80
Harley's list and link https://serviceinfo.harley-davidson....9?locale=en_US
Screw, #6-32 PAN HD, TORX, Black (8)
10200105
Grille assembly, 6 1/2" premium (2)
76000324
Wire harness (1)
69200612
Woofer assembly, premium, 6 1/2" (2)
76000320
Welnut, #6-3 (8)
5210
Screw, self-tapping, 1/4" X .75" (4)
Not sold separately
Speaker enclosure, tray, fairing LWR, RH (1)
Speaker enclosure, tray, fairing LWR, LH (1)
76000369
76000368
Gasket seal (2)
Not sold separately
Screw, #10 self tapping (6)
2995
Grommet, harness seal (2)
11410
ABENS
I saw a old parts list from BERTK from 2016 but the install link was broken. The Harley install list has a bunch of different parts needed.
BERTK'S
Vivid Black speaker boxes PN: 76000497DH $280
Speaker Enclosure left & right PN: 76000368/76000369 $41 each
Gasket seal, adhesive-backed (2) PN: 25700311
Captive nut (8) PN: 10100064
CVO speaker grills PN: 76000065 $31 each
Grill screws PN: 10200105 (10) $4.80
Harley's list and link https://serviceinfo.harley-davidson....9?locale=en_US
Screw, #6-32 PAN HD, TORX, Black (8)
10200105
Grille assembly, 6 1/2" premium (2)
76000324
Wire harness (1)
69200612
Woofer assembly, premium, 6 1/2" (2)
76000320
Welnut, #6-3 (8)
5210
Screw, self-tapping, 1/4" X .75" (4)
Not sold separately
Speaker enclosure, tray, fairing LWR, RH (1)
Speaker enclosure, tray, fairing LWR, LH (1)
76000369
76000368
Gasket seal (2)
Not sold separately
Screw, #10 self tapping (6)
2995
Grommet, harness seal (2)
11410
ABENS
Road Captain
Joined: Sep 2007
Posts: 602
Likes: 51
From: central MN
Check out this thread. In my post in that thread there is a picture of my parts list. That is all you'll need besides your lowers and your color-matched speaker pods, along with your speakers and wire. Oh, and not to beat a dead horse, but don't let anybody tell you the wellnuts won't work. Just be careful that they are fully seated as you're tightening the screws and only tighten them barely snug with a driver. I think the spec is like 2 in/lb. NO LOCTITE.
https://www.hdforums.com/forum/audio...part-list.html
https://www.hdforums.com/forum/audio...part-list.html
Last edited by thereal142; Feb 18, 2018 at 04:02 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Harleypingman
Audio Systems
239
Sep 28, 2016 01:56 PM
