Amp install
Thread Starter
|
Stage III
Joined: Apr 2018
Posts: 3
Likes: 0
From: Alberta
Amp install
Purchased speakers and amp for upgrade to 2017 road glide, curious as to what hooks up to the head, from doing stereos in vehicles In the past the RCA goes into the head from the amp, but there are no jacks on head unit, where do they go?
Club Member
Joined: Sep 2014
Posts: 7,618
Likes: 10,437
From: Des moines IA
You'll want a Biketronics Bt355 Line leveler. With that you unplug your speaker harness and plug the HU side of that harness into the line leveler. From there you use RCA jumpers from the line leveler to the input side of the amp. You then run wires from the output side of the amp to your speakers.
The BT355 flattens and levels out the crazy eq curve of the stock head unit and simultaneously gives you the low level connections you are asking about.
The BT355 flattens and levels out the crazy eq curve of the stock head unit and simultaneously gives you the low level connections you are asking about.
Thread Starter
|
Stage III
Joined: Apr 2018
Posts: 3
Likes: 0
From: Alberta
Biketronics
I did read that on Biketronics, but it seemed odd that your bypassing the actual stereo unit and just plugging in speaker wires etc. I guess I am. Just over thinking this simple process.
Outstanding HDF Member
Joined: Jan 2014
Posts: 2,482
Likes: 239
From: Minnesota
Thread
Thread Starter
Forum
Replies
Last Post
