I Installed system yesterday with help from Mike at biketronics, after a 3 hr ride system has no sound, amp is on and grounded, all wires connected, line levers checked, and I had the flash done. There is no sound coming from the speakers.

Just to be sure I didn't blow anything or fuse, I reconnected old system which includes the Boom amp and everything fired up fine, except for the low volume due to flash. Does anyone have any Idea ? I'm thinking line levers.

It sucks that Biketronics would be closed on Saturday when most people have the time to Install and fine tune. no support on weekends.

4180.14 AMP
15 RGU CVO.

 

Try a different form of rca input to see if you get sound? That would confirm line levelers I would think.

 

Was it fine during the ride? Did it quit while riding and just all of a sudden cut out or did it quit after a stop and you got back on bike? Green light on amp on?

Try calling or emailing. Mike is routinely in on the weekends and often responds even though they are closed.

 

I know you daid the amp has power, but what about power to the Rem lead?

 

 

 

8007352419 and leave a message or orders@biketronics.com

 

 

Correction Mike emailed me, hopefully i can sort this out and put the bike back together.

 

Long shot, but I've also seen RCA's vibrate loose. Instant no sound.