Cv b52
Thread Starter
|
Cruiser
Joined: Jul 2011
Posts: 145
Likes: 7
From: Illinois
I already have an amp on that tray, want to add a second. The space I’m referring to is the dead space on the opposite side of the glove box. The ultras have a CB module there. I however don’t and it’s wide open. I measured it and the numbers say it will work, didn’t know if anyone tried.
Ultimate HDF Member
Joined: Mar 2015
Posts: 6,446
Likes: 873
From: TEXAS
Originally Posted by firemedic4500
I already have an amp on that tray, want to add a second. The space I’m referring to is the dead space on the opposite side of the glove box. The ultras have a CB module there. I however don’t and it’s wide open. I measured it and the numbers say it will work, didn’t know if anyone tried.
T
Outstanding HDF Member
Joined: Jan 2014
Posts: 2,482
Likes: 239
From: Minnesota
Trending Topics
Tourer
Joined: May 2013
Posts: 367
Likes: 38
From: WI
Yeah, it didn't really seam like it supported much of anything to me. I think I could put it back in with this setup if I needed to though. I just mocked this setup up and don't plan on doing the actual install until riding season is over.
Thread Starter
|
Cruiser
Joined: Jul 2011
Posts: 145
Likes: 7
From: Illinois
Wow, that’s crazy. I ended up buying a TM400X2AD to compliment my 400x4 and after some creative maneuvering, it fits in the CB cubby. I’m redoing my entire system with EPC6k’s And 69motos... crossing my fingers they aren’t junk. Getting mixed reviews in here about the EPC6k’s. Cheap enough so we will see.
Thread
Thread Starter
Forum
Replies
Last Post