PRV vs Ground Zero 8”
Thread Starter
|
Road Captain
Joined: May 2011
Posts: 547
Likes: 13
From: bay area california
PRV vs Ground Zero 8”
Curious if anyone has had a side by side comparison of PRV 8” and Ground Zero 8”. Currently running a pair of low frequency ground zero 8” in my SBD lids. They are bridged off rear channels of a SD1200.4. Getting roughly 3-400 Watts rms. Thought some of you out there might have heard some side by side. Was thinking of the PRV possibly. Thoughts? Thanks in advance!!!!!
Stellar HDF Member
Joined: Aug 2014
Posts: 2,838
Likes: 572
From: Lockport Illinois
Curious if anyone has had a side by side comparison of PRV 8” and Ground Zero 8”. Currently running a pair of low frequency ground zero 8” in my SBD lids. They are bridged off rear channels of a SD1200.4. Getting roughly 3-400 Watts rms. Thought some of you out there might have heard some side by side. Was thinking of the PRV possibly. Thoughts? Thanks in advance!!!!!
If you can list the speakers you have and what you are looking at along with sound you are expecting will help others give you their 2 pennies on your choices
Thread Starter
|
Road Captain
Joined: May 2011
Posts: 547
Likes: 13
From: bay area california
Currently have ground zero GZCK 200 spl , comparing to prv 8mr500ndy4. Since they are in my lids I’m looking for a nice speaker that has great midbass and high vocals. Approximately 350 W RMS per speaker
Thread
Thread Starter
Forum
Replies
Last Post
