Tuning Question
Thread Starter
|
Road Captain
Joined: Jul 2019
Posts: 720
Likes: 48
From: Fort Worth
Tuning Question
After our long post yesterday, I'm working on tuning what I have. Here is my question. This is in reference to one 2 channel amp powering mmats 601.4s and ds35t, each on separate channels. Is it best to:
A. Set gains to the 601.4, then trim on the Dsr for the horns.
Or
B. Set gains down for the horns and pump up the 601.4s on the eq.
I'm driving to Austin, so thanks in advance if I dont reply quickly. Fyi..
This is on an NVX VAD2M.
A. Set gains to the 601.4, then trim on the Dsr for the horns.
Or
B. Set gains down for the horns and pump up the 601.4s on the eq.
I'm driving to Austin, so thanks in advance if I dont reply quickly. Fyi..
This is on an NVX VAD2M.
Elite HDF Member
Joined: Aug 2008
Posts: 4,150
Likes: 459
From: S. FL
After our long post yesterday, I'm working on tuning what I have. Here is my question. This is in reference to one 2 channel amp powering mmats 601.4s and ds35t, each on separate channels. Is it best to:
A. Set gains to the 601.4, then trim on the Dsr for the horns.
Or
B. Set gains down for the horns and pump up the 601.4s on the eq.
I'm driving to Austin, so thanks in advance if I dont reply quickly. Fyi..
This is on an NVX VAD2M.
A. Set gains to the 601.4, then trim on the Dsr for the horns.
Or
B. Set gains down for the horns and pump up the 601.4s on the eq.
I'm driving to Austin, so thanks in advance if I dont reply quickly. Fyi..
This is on an NVX VAD2M.
do NOT do number 2.
Thread
Thread Starter
Forum
Replies
Last Post
