Help with new build

Reply Subscribe

Thread Tools

Search this Thread

Jul 25, 2024 | 12:25 PM

Eric Steward

Thread Starter

Tourer

Joined: Jul 2016

Posts: 303

Likes: 17

From: alabama

Help with new build

I know we have some very knowledgeable people on here, so I will try to make this short. I had to take my audio system apart because I was getting some kind of pop when I started my bike. Now I am going to try to put it back together with a wiring configuration to maximize my output. I have the following on my bike now:
Soundstream -HU
ddaudio- Dsi 3 DSP
Diamond 6.5 MP654- tweeters are on their own channels fairing
PRV - 6mr500-NDY-4- on the lower fairing
DDaudio - VO-XN6x9a in my bag lids
PRV- 8's 8MR500CF-ndy-4 *ohms
I am just trying to figure out how to connect everything.

Thanks

P.S. I have 2 /1200.4 and 1/ 800.4 soundigital amps

Jul 25, 2024 | 02:00 PM

cshocker

Stellar HDF Member

Joined: Jul 2016

Posts: 2,210

Likes: 668

From: Andover, MN

There's a few ways to do it, but I would probably do:
-- 1200.4 1/2 bridged to PRV 8, 3/4 bridged to other PRV 8
-- 1200.4 1/2 running PRV in lowers and 3/4 running Woofers in Fairing
-- 800.4 1/2 running horns and 3/4 running 6x9's (as those 6x9 do not need a lot of power)

This will get the most for midbass and sound in front of you with some filler coming from lids.

Last edited by cshocker; Jul 25, 2024 at 02:02 PM.