EX6NCD-CF New
Thread Starter
|
Stage IV
Joined: Oct 2022
Posts: 4
Likes: 0
From: israel
EX6NCD-CF New
I was excited to receive the pair of new speakers EX6NCD-CF - today there are two 800.4 amplifiers in the wiring and each bridged to yellow baskets in front and SX690 in the lids.
Now for the question that bothers me in trying to know what I'm going for, just out of curiosity to hear how the XPERTs sound, I disassembled the wiring of one of the SX690 from the LID, I arranged the 100HP-2800LP crossover in the DSP and connected only the woofer of the XPERT - I updated the same crossover in the SX690 in the other LID.
The result was that I could hardly hear the XPERT since its volume was very low, I disconnected the SX690 and tried to play only on the XPERT - the thing is that the volume was a quarter or so as strong as the SX690. I tried to play more crossovers with both types of speaker for comparison, still the difference was huge.
Questions:
1. A problem with XPERT? I don't think so and I checked both - they are the same
2. Could it be that GAINS are simply too low because they are adapted to the SX690?
I know it's not a bad idea to increase the amplifier, but 400W for just one woofer should be enough and I've seen quite a few opinions with amazing results.
Another thing about the crossover - I received a recommendation to give the woofer 100HP-2800LP and the HORNS 4800HP - is this correct?
Thank you very much in advance for typing information and reference!!
Now for the question that bothers me in trying to know what I'm going for, just out of curiosity to hear how the XPERTs sound, I disassembled the wiring of one of the SX690 from the LID, I arranged the 100HP-2800LP crossover in the DSP and connected only the woofer of the XPERT - I updated the same crossover in the SX690 in the other LID.
The result was that I could hardly hear the XPERT since its volume was very low, I disconnected the SX690 and tried to play only on the XPERT - the thing is that the volume was a quarter or so as strong as the SX690. I tried to play more crossovers with both types of speaker for comparison, still the difference was huge.
Questions:
1. A problem with XPERT? I don't think so and I checked both - they are the same
2. Could it be that GAINS are simply too low because they are adapted to the SX690?
I know it's not a bad idea to increase the amplifier, but 400W for just one woofer should be enough and I've seen quite a few opinions with amazing results.
Another thing about the crossover - I received a recommendation to give the woofer 100HP-2800LP and the HORNS 4800HP - is this correct?
Thank you very much in advance for typing information and reference!!
Thread
Thread Starter
Forum
Replies
Last Post
rotcart
Tri Glide, RG3 & Freewheeler Models
11
Sep 3, 2017 07:55 AM
