Changed ignition wont start
Thread Starter
|
Novice
Joined: Jul 2017
Posts: 21
Likes: 2
From: Fort Walton Beach
Changed ignition wont start
I had to change my ignition switch today. It was easier with the gas tank removed. The bike would crank and run before I did it. I disconnected the gas line and the line going to the vent. They are both reconnected. When I got this all put back together the bike cranked right up, used the gas in the bowl and then went dead. It wont crank again. I have done something that is preventing fuel from coming to the carb. I fiddled with the valve but put it back to the original position. Im going to look in my book but maybe somebody sees something I missed right away.
Thread
Thread Starter
Forum
Replies
Last Post
ninrjd3
Ignition/Tuner/ECM/Fuel Injection
1
Aug 10, 2012 01:39 PM
