Has anyone had the pleasure of changing fork seals on a TMCC? Noticed some leakage on the right seal on my 2006 Keystone. All I know about the front end is that it was made by Perse Performance.

Any help would be greatly appreciated.

 

Don't know anything about TMCC but most custom bikes of the era used 41mm forks. I would suspect that the seal and bushing kits for a HD Dyna wide glide will fit. Measure the fork tube and if they are close to 41mm (IIRC they are closer to 1.625") , chance are that those parts will fit.

 

Thanks for that info.

Bigger problem might be getting the front end apart. Aside from the bolts in the lower tree, the only other fasteners I see are small Allen screws in the dust covers just above the fork lowers.

 

There isn't one in the bottom of the fork leg? That would be showa style damper rod. If not you might need to remove the covers and a snap ring.