Buffing-Pinstriping Phoenix AZ

Reply Subscribe

Thread Tools

Search this Thread

Jan 23, 2008 | 09:33 AM

mvinc01

Thread Starter

Road Master

Joined: Mar 2007

Posts: 929

Likes: 2

From: Peoria, AZ

Buffing-Pinstriping Phoenix AZ

I'm looking for your help here.

I am looking for a recomendation of an affordablelocal Phoenix-Peoria-Glendale AZ detailer, that isfamiliar with working on motorcycles, that buff out the swirl and fine surface scratches on my '07 Road Glide. The tins would remain on the bike.

Also looking for a recomendation of an affordablelocal Phoenix-Peoria-Glendale AZ painter/pinstriper that can do some freehand pinstriping on my tins in silver and orange. Just some accent pinstriping.

I am getting ready to apply the Profinish protective material to some of my body pieces and would like the piant to be as good as it can be prior to application. No wax though, just buffing and polishing. The bike will already be clean and ready to polish.

The bike is not show quality. It is stock. I'm just looking to dress up the stock paint a little. I will take suggestions onideas, however, I am looking to avoid removing tins or additional clear coating.

Thanks!

Jan 23, 2008 | 09:43 AM

mvinc01

Thread Starter

Road Master

Joined: Mar 2007

Posts: 929

Likes: 2

From: Peoria, AZ

RE: Buffing-Pinstriping Phoenix AZ

Quote:

ORIGINAL: mvinc01

I'm looking for your help here.

I am looking for a recomendation of an affordablelocal Phoenix-Peoria-Glendale AZ detailer, that isfamiliar with working on motorcycles, that buff out the swirl and fine surface scratches on my '07 Road Glide. The tins would remain on the bike.

Also looking for a recomendation of an affordablelocal Phoenix-Peoria-Glendale AZ painter/pinstriper that can do some freehand pinstriping on my tins in silver and orange. Just some accent pinstriping.

I am getting ready to apply the Profinish protective material to some of my body pieces and would like the piant to be as good as it can be prior to application. No wax though, just buffing and polishing. The bike will already be clean and ready to polish.

The bike is not show quality. It is stock. I'm just looking to dress up the stock paint a little. I will take suggestions onideas, however, I am looking to avoid removing tins or additional clear coating.

Thanks!

Also, please let me know your thoughts on what I am looking at in terms of general cost of these jobs.

Let me know if this post is better suited for the Touring Forum or another forum?

Thanks again!