Rear signal relocation advice?
Thread Starter
|
6th Gear
Joined: Feb 2016
Posts: 11
Likes: 0
From: Oklahoma
Rear signal relocation advice?
I have a 2007 street bob and I want to move my rear signals from stock to what you see in the pic. I know the light bar is off of another bike but what bike is it off of? Also I know I'll have to rig it up to make it work but will I have to drill holes in my rear fender? Any help is appreciated!
I've seen a couple of kits but if you have another suggestion, I'd like to know. Thanks
I've seen a couple of kits but if you have another suggestion, I'd like to know. Thanks
Stellar HDF Member
Joined: May 2015
Posts: 2,902
Likes: 443
From: West Tennessee
I used this kit also. Priced fairly from Harley and is pretty much plug and play as long as your wires haven't been butchered by a PO like mine were. I am assuming the 07 still had the normal rear light and turn signals unlike the newest SB.
We offer this in black or chrome for the 2007 Street Bob.
http://www.greatbikegear.com/index.php/tsdnald.html
http://www.greatbikegear.com/index.php/tsdnald.html
the light bar in the pic is a touring bullet light bar, part no: 68615-04
you'll have to drill the fender and grind the back of the bar a little to make it sit flush.
do a search you'll find that me and a couple others have posted about our experience
you'll have to drill the fender and grind the back of the bar a little to make it sit flush.
do a search you'll find that me and a couple others have posted about our experience
Thread
Thread Starter
Forum
Replies
Last Post
Rick5150
Electrical/Lighting/Alarm
0
Apr 28, 2009 05:51 AM
