When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Dyna Glide ModelsSuper Glide, Super Glide Sport, Super Glide Custom, Dyna Glide Convertible, Super Glide T-Sport, Dyna Glide Police, Dyna Switchback, Low Rider, Street Bob, Fat Bob and Wide Glide.
Tarik (and maybe Bruce) check my link in this thread HERE
When Multi tells me to do something, I always drop everything and do it (and just did)! He always knows!!!
Yup, before installing an R&R Cycles Overflow, I used to run the same SE backing plate (with a horseshoe breather). I know that backing plate is set up to accept the breather vents, but Bruce's description of having a "crossover tube" made me think he was running a similar external vent setup to the one I used... But I guess not?
Had the bike for a year. Only thing Ive done is shocks and fork springs, and some carb work. When I worked on the carb I just put it back in the way it came out. It does have the horseshoe breather, but instead of venting to a canister or open, the hose is on a nipple on the backplate with a clamp. Wish I could attach pics. Maybe its my phone.
When Multi tells me to do something, I always drop everything and do it (and just did)! He always knows!!!
I'm Glad to see that we "Have an Understanding" ...
Yup, before installing an R&R Cycles Overflow, I used to run the same SE backing plate (with a horseshoe breather). I know that backing plate is set up to accept the breather vents, but Bruce's description of having a "crossover tube" made me think he was running a similar external vent setup to the one I used... But I guess not?
I was just throwing it out there ... just in case (and if someone hadn't seen that style before)
Follow up question. I got the drag specially horseshoe breather. The instructions dont mention anything about the bracket holding the carb. Not sure what order to put washers in relation to bracket. The bracket holds in the carb and is bolted with the breather kit.
When Multi tells me to do something, I always drop everything and do it (and just did)! He always knows!!!
Yup, before installing an R&R Cycles Overflow, I used to run the same SE backing plate (with a horseshoe breather). I know that backing plate is set up to accept the breather vents, but Bruce's description of having a "crossover tube" made me think he was running a similar external vent setup to the one I used... But I guess not?
Yep... Dude knows his stuff.... I'll read what he links to.... Always a good read too.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.
