Peg mounting bracket on dyna frame

Reply Subscribe

Thread Tools

Search this Thread

Feb 15, 2023 | 11:18 AM

Volkspanzer

Thread Starter

Tourer

Joined: May 2021

Posts: 274

Likes: 400

From: Reading Pennsylvania

Peg mounting bracket on dyna frame

Does the bracket on the frame where you would mount forwards or highway pegs need to be drilled or tapped in order to be used? I’m at work and can’t look at it right now. The last time I checked it it almost looked like it needed to be drilled or tapped. Thanks. It’s on my 2017 Street Bob.

Feb 15, 2023 | 11:23 AM

2500hdon37s

Stellar HDF Member

Joined: May 2014

Posts: 3,155

Likes: 1,728

From: Mid-MO

Nope, threaded from the factory. Just has little plastic plugs in the holes.

I mounted a Bung King crash bar on mine and didn’t have to do anything but bolt it on.

Feb 15, 2023 | 11:26 AM

Volkspanzer

Thread Starter

Tourer

Joined: May 2021

Posts: 274

Likes: 400

From: Reading Pennsylvania

Quote:

Originally Posted by 2500hdon37s

Nope, threaded from the factory. Just has little plastic plugs in the holes.

I mounted a Bung King crash bar on mine and didn’t have to do anything but bolt it on.

Aaahh so it’s plastic plugs that I’m seeing. I was wondering why the holes looked sealed.

Feb 15, 2023 | 01:25 PM

snake_eyes

Stellar HDF Member

Joined: Aug 2019

Posts: 3,121

Likes: 1,906

From: Unreconstructed

You'll want to chase those threads before you use them, they'll likely be rusty since those plugs aren't very effective.

Feb 16, 2023 | 03:37 AM

FX WideGlide

Cruiser

Joined: Oct 2022

Posts: 171

Likes: 80

From: Sacramento County, California

Yes, as everyone says, they are black plastic plugs. I added mid pegs to my Wide Glide to hold my custom floorboads and had to remove them. A sharp knife will take them right out and, as mentoned, chase the threads before use, Threads are 3/8-16 and if you are using standard Harley bolts. they have a 45 Torx head.

Last edited by FX WideGlide; Feb 16, 2023 at 06:16 AM.