* HOW TO * under fifty bux *
Thread Starter
|
Club Member
Joined: May 2006
Posts: 14,564
Likes: 9,223
From: the 50s & the 60s
Sorry I missed your question earlier jarhead.
I've changed quite a few things since poking it and stroking it to 121 inchs.
This is the Doherty A/C, but they supply chickensh.t plastic fittings
along with their 300 buck assembly.
The Brass fittings are commonly found at Plumbing Supply houses,
better Auto Parts dealers, online at McMaster Carr, etc etc.
Billet mini catch can by Golan Made in the USA - part # 66-2110-6731
look near the bottom on this page
http://www.nrhsperformance.com/partscarburetion.shtml
I have all the pix for a step by step on this one,
just need to find time to post it up.
mud...........
.
Thread Starter
|
Club Member
Joined: May 2006
Posts: 14,564
Likes: 9,223
From: the 50s & the 60s
.
Installing an Oil Temperature Gauge,
last step was to pickup 12 volts keyed, and a ground.
There it was, less than a foot away.
First picture here shows the bottom side of
my 06 FXD Fuel Gauge.
No wire cutting,
and there is a conduit provided on the stock grommet.
Cost?? Two fittings.
.
Next picture shows wires exiting the conduit from below.
Easy money.
mud..............
.
Installing an Oil Temperature Gauge,
last step was to pickup 12 volts keyed, and a ground.
There it was, less than a foot away.
First picture here shows the bottom side of
my 06 FXD Fuel Gauge.
No wire cutting,
and there is a conduit provided on the stock grommet.
Cost?? Two fittings.
.
Next picture shows wires exiting the conduit from below.
Easy money.
mud..............
.
Sorry I missed your question earlier jarhead.
I've changed quite a few things since poking it and stroking it to 121 inchs.
This is the Doherty A/C, but they supply chickensh.t plastic fittings
along with their 300 buck assembly.
The Brass fittings are commonly found at Plumbing Supply houses,
better Auto Parts dealers, online at McMaster Carr, etc etc.
Billet mini catch can by Golan Made in the USA - part # 66-2110-6731
look near the bottom on this page
http://www.nrhsperformance.com/partscarburetion.shtml
I have all the pix for a step by step on this one,
just need to find time to post it up.
mud...........
.
I've changed quite a few things since poking it and stroking it to 121 inchs.
This is the Doherty A/C, but they supply chickensh.t plastic fittings
along with their 300 buck assembly.
The Brass fittings are commonly found at Plumbing Supply houses,
better Auto Parts dealers, online at McMaster Carr, etc etc.
Billet mini catch can by Golan Made in the USA - part # 66-2110-6731
look near the bottom on this page
http://www.nrhsperformance.com/partscarburetion.shtml
I have all the pix for a step by step on this one,
just need to find time to post it up.
mud...........
.
MUD this is fantastic! i love that oil pressure line man... god you are good man... very cool! thanks!
Thread Starter
|
Club Member
Joined: May 2006
Posts: 14,564
Likes: 9,223
From: the 50s & the 60s
Thanks for the compliment JRK.
Moved the line now when I installed a different Oil Pressure Gauge
and Oil Temperature, mounted up top.
mud............
.
.
.
.
Thread Starter
|
Club Member
Joined: May 2006
Posts: 14,564
Likes: 9,223
From: the 50s & the 60s
Yeah jarhead, the Doherty is really nice.......... for the most part.
mud
Cruiser
Joined: Sep 2008
Posts: 154
Likes: 0
From: great white north
disk lock stash
Drill a hole on the hiway peg bracket to carry a disc lock when not in use. Its the thing that looks like a grenade. To easily locate the hole ,its depth is where the lock bottoms out-drilled 1/32 oversize and chamfered.
Last edited by soldierbot; Apr 2, 2021 at 07:46 AM.
MUD YOU HAVE A SHIFT LIGHT!!!! OOH MAN! I NEEEEEED TO KNOW HOW YOU DID THAT! crap man you come up with the cooooooolest mods! man, just awesome! PLEASE break that down for me if you can... i would love to have that set up on my ride! man i love all that you have done to your bike, between the tank, fenders... now the motor... Jelous... that i am!
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo
Thread Starter
|
Club Member
Joined: May 2006
Posts: 14,564
Likes: 9,223
From: the 50s & the 60s
Can't get much cheaper than this.
Good thinking sloMo.
Looks good too.
mud
