Power Comander Download Help?
Thread Starter
|
Intermediate
Joined: Sep 2007
Posts: 34
Likes: 0
Power Comander Download Help?
Hey guys I bought my Cycle Shack Slip ons, Power Comander and Stage II air Cleaner. Problem I am having is I cannot finda download anywhere on there site for these pipes. Any ideas?
Pipes are Cycle Shack MS-129 Balony Cut
Thanks
Pipes are Cycle Shack MS-129 Balony Cut
Thanks
Thread Starter
|
Intermediate
Joined: Sep 2007
Posts: 34
Likes: 0
RE: Power Comander Download Help?
ORIGINAL: strich
didja get the PC from FuelMoto? if so, go fill out the little form and tell them the specs and Jamie will put together a custom map just for you.
didja get the PC from FuelMoto? if so, go fill out the little form and tell them the specs and Jamie will put together a custom map just for you.
They sound loud and have a nice rumble. But the closest download I found from them was for a set of screamen eagle slip ons.
Stellar HDF Member
Joined: Nov 2007
Posts: 3,363
Likes: 109
From: Mesa, Az.
RE: Power Comander Download Help?
To start with just find a map close to your configuration, you might try one with the rush slip-ons.
You can try different maps to find which one works best for you.
Once broken in, you can always dyno tune it.
You can try different maps to find which one works best for you.
Once broken in, you can always dyno tune it.
Thread Starter
|
Intermediate
Joined: Sep 2007
Posts: 34
Likes: 0
RE: Power Comander Download Help?
Well they sound good now. I am going to get it on a Dyna tomorrow. It is running a little rich so needs to be corrected.
Tell you what the Cycle Shack MS-129 are a loud option for hte money. They are way louder than SE II or the Rush pipes. Not sure why but big diff.
Tell you what the Cycle Shack MS-129 are a loud option for hte money. They are way louder than SE II or the Rush pipes. Not sure why but big diff.
Thread
Thread Starter
Forum
Replies
Last Post
