2 into 1 pipe questions..
Thread Starter
|
Tourer
Joined: Mar 2007
Posts: 452
Likes: 2
From: SF Bay Area
2 into 1 pipe questions..
are the 2 into 1 pipes 2 pieces ? or 1 solid pipe ?
or both...
Which ones have a seperate muffler ?
and what size is the inlet where muffler attaches (if 2 piece)
Is Thunderheader 1 or 2 piece...
or both...
Which ones have a seperate muffler ?
and what size is the inlet where muffler attaches (if 2 piece)
Is Thunderheader 1 or 2 piece...
Tourer
Joined: Dec 2006
Posts: 314
Likes: 0
From: North Hills California
RE: 2 into 1 pipe questions..
I have had three different 2-1 pipes and the one on my bike now is a Thunderheader. It is one piece. I had a Bassani 2-1 before that, and it was also one piece. I got both of these used, and am happy with the Thunderheader so far. My first one which I bought new when they first came out was a Python 2-1. This pipe is two pieces, and I think the end of the collector where the muffler bolted on was 2". The Python is just a Vance & Hines Pro Pipe with a prettier muffler so its safe to say that the Pro Pipe is a two piece as well. I Believe the D&D Fat Cat is also two piece, and it seems that everyone likes this pipe better than any of the others these days, but I personally have never had one.
[IMG]local://upfiles/21800/1B73912BE4964874B802E4923BCC6B12.jpg[/IMG]
[IMG]local://upfiles/21800/EBBECB2350D24146A025E4F30330C8E0.jpg[/IMG]
[IMG]local://upfiles/21800/50467A5F644E4DAC9999399267B380DA.jpg[/IMG]
[IMG]local://upfiles/21800/1B73912BE4964874B802E4923BCC6B12.jpg[/IMG]
[IMG]local://upfiles/21800/EBBECB2350D24146A025E4F30330C8E0.jpg[/IMG]
[IMG]local://upfiles/21800/50467A5F644E4DAC9999399267B380DA.jpg[/IMG]
Road Master
Joined: Jul 2007
Posts: 1,101
Likes: 2
From: The Left Coast
RE: 2 into 1 pipe questions..
As mentioned, the PYTHON 2-1 is a two piece and I was not happy with the POS clamp/collector heat shield that came with it, I put a heftier clamp on and wrapped my pipes.
Thread
Thread Starter
Forum
Replies
Last Post
