Have a Great Independence Day
Thread Starter
|
Cruiser
Joined: May 2006
Posts: 147
Likes: 0
From: Minnesota
Have a Great Independence Day
Well the day has come again to dust off the grill and enjoy a lil freedom. Pretty amazing I would have to say. It is like Christmas and Easter for those who believe. It just brings us back to remberance of the great things we do have because of others. If you don't have a "support our troops" sticker, at least have one for tomorrow. I am not bringing up the political end, just the fact that most of us have friends/family in Iraq or around. So, lets us give thanks, and enjoy some good ol American freedom that has come by sweat and blood over the years. Crack open a cold one (my choice is IBC rootbeer) and get your grub on with the family and watch things go boom. Ear plugs are good, but explosions are awesome!
I do have a great friend in Iraq in the Marine Reserves along with a couple of guys from the shop. I am stationed in PC FL in the AF.
We have a weekend duty rotation and I just fell on this weekend. No biggy, we get friday off. I also Have some work to do on the Dyna. I have been having a charging issue. I thought it was the regulator after I ran a test on the system, and the new one is in and same issue. THe last maintainance done on it was the Primary Bearing a week prior to the \\; bike failing, so I am assume that the stator was jacked up some how. So I am diving in early next week. No sense in bring it back when it costs more in gas to get it there. Plus it is out of warrenty.
I do have a question, anyone know these part numbers on 6-3 in the 06 dyna service manual?
The list on figure 6-4. Mostly:
5. Sealing Fastners
7. Drain plug and o-ring
9. Tower Gasket
12. Crank case gasket
Along with the 07 stator part number.
Oh, and who do you fellas use for brake pads? I remember a company on here that had little to no brake dust. That would rock.
HD Forums, have a great Independence Day!!
Blessings,
Street
I do have a great friend in Iraq in the Marine Reserves along with a couple of guys from the shop. I am stationed in PC FL in the AF.
We have a weekend duty rotation and I just fell on this weekend. No biggy, we get friday off. I also Have some work to do on the Dyna. I have been having a charging issue. I thought it was the regulator after I ran a test on the system, and the new one is in and same issue. THe last maintainance done on it was the Primary Bearing a week prior to the \\; bike failing, so I am assume that the stator was jacked up some how. So I am diving in early next week. No sense in bring it back when it costs more in gas to get it there. Plus it is out of warrenty.
I do have a question, anyone know these part numbers on 6-3 in the 06 dyna service manual?
The list on figure 6-4. Mostly:
5. Sealing Fastners
7. Drain plug and o-ring
9. Tower Gasket
12. Crank case gasket
Along with the 07 stator part number.
Oh, and who do you fellas use for brake pads? I remember a company on here that had little to no brake dust. That would rock.
HD Forums, have a great Independence Day!!
Blessings,
Street
Tourer
Joined: Nov 2007
Posts: 356
Likes: 0
From: Portland Oregon
RE: Have a Great Independence Day
Great post Street, thanks for sharing and same to you and \\;\\\\\\;our troops out there.
 \\;\\\\\\;
Loved by God, saved by Jesus and "indwelt" by the Holy Spirit but only filled by 1st John 1:9
 \\;\\\\\\;
Loved by God, saved by Jesus and "indwelt" by the Holy Spirit but only filled by 1st John 1:9
Thread Starter
|
Cruiser
Joined: May 2006
Posts: 147
Likes: 0
From: Minnesota
RE: Have a Great Independence Day
That is a great verse.
Hope your fourth was good, but I still have those questions about the part numbers in the original post. Anybody know them? Or where I could find them?
Thanks
Hope your fourth was good, but I still have those questions about the part numbers in the original post. Anybody know them? Or where I could find them?
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
