new tail light for the fat bob
Road Captain
Joined: Feb 2008
Posts: 712
Likes: 0
From: Ponte Vedra, FL
I thought that the fender on the Fat Bob was wider than the Wide Glide. I could be wrong but that was my understanding since the Fat Bob has the 180 tire on the back.
Cruiser
Joined: Nov 2007
Posts: 104
Likes: 0
Picked mine up Monday. Couldn't wait to see it on so I put it on in the hour I had before dinner with customers. Took about 30 minuted and I was able to do it in dress pants and a golf shirt without making a mess. Looks 100 times better than the stock hemaroid sticking out. Remove 3 bolts on each side and the fender comes right off. Was worried I would have to drop the shocks becasue of the strut covers, but that is not a problem at all.
Great mod and I was so happy Harley pulled their head out their butt and made a light that was not only a decent replacement, but awesome!
Great mod and I was so happy Harley pulled their head out their butt and made a light that was not only a decent replacement, but awesome!
Road Master
Joined: Oct 2007
Posts: 918
Likes: 3
From: England
From the photographs it doesn't look like it's going to fit with the bob tail fender rack although it doesn't mention it in the catalogue.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Intermediate
Joined: May 2008
Posts: 26
Likes: 0
TRI BAR on FAT BOB
I installed it last weekend. Be prepared to remove the rear fender and be sure to cut the zip strips on the bottom side of the fender like it states in the directions. Trust me, those little bastards can cost you an extra half hour if you miss it. It looks and operates 10x better than the bubble light.
Not sure how to put a pic in the post but got it in an attachment.
Not sure how to put a pic in the post but got it in an attachment.
Road Captain
Joined: Feb 2008
Posts: 712
Likes: 0
From: Ponte Vedra, FL
Which bolts did you remove? I was going to get a service manual but my dealership didn't have any. All the instructions say is.....
Remove the seat per the instructions in the service manual
Remove the fuse per the instructions in the service manual
Remove the tail lights per the instructions in the service manual
Etc Etc Etc
Remove the seat per the instructions in the service manual
Remove the fuse per the instructions in the service manual
Remove the tail lights per the instructions in the service manual
Etc Etc Etc
Picked mine up Monday. Couldn't wait to see it on so I put it on in the hour I had before dinner with customers. Took about 30 minuted and I was able to do it in dress pants and a golf shirt without making a mess. Looks 100 times better than the stock hemaroid sticking out. Remove 3 bolts on each side and the fender comes right off. Was worried I would have to drop the shocks becasue of the strut covers, but that is not a problem at all.
Great mod and I was so happy Harley pulled their head out their butt and made a light that was not only a decent replacement, but awesome!
Great mod and I was so happy Harley pulled their head out their butt and made a light that was not only a decent replacement, but awesome!