Relocating TURN SIGNALS
Thread Starter
|
Cruiser
Joined: Aug 2005
Posts: 144
Likes: 0
From: TX
Relocating TURN SIGNALS
I just bought the turn signal relocation kit (to front forks) for my 06 Street Bob. How much effort is it going to take for me to install it?
Any ideas on how long it will take?
I am also going to be installing RudeDog's tank lift kit.
Any ideas on how long it will take?
I am also going to be installing RudeDog's tank lift kit.
Thread Starter
|
Cruiser
Joined: Aug 2005
Posts: 144
Likes: 0
From: TX
RE: Relocating TURN SIGNALS
I gave before i even started. the instructions seep saing to dissasenble something "just like in the sevice manuel." i got tired of seeing that everywhere, so i gave up. I did, however, get the tank lift on. Pics will follow this evening.
3rd Gear
Joined: Mar 2006
Posts: 7
Likes: 0
From:
RE: Relocating TURN SIGNALS
I just relocated the turn signals on my '06 wide glide. It took me about 4 hours to complete.
It was a good bit of work. I would suggest using a service manual along with the instructions in the kit unless your a pro.
It was a good bit of work. I would suggest using a service manual along with the instructions in the kit unless your a pro.
Tourer
Joined: Mar 2006
Posts: 449
Likes: 1
From: Ventura, CA (So Cal)
RE: Relocating TURN SIGNALS
I cheated when i did mine, and didn't remove the gas tank. I just get the wires on the back of the socket and left about an inch on each one and soldered and heatshrinked them back together. I didn't feel like dumping gas all over my new bike which is why i chose not to remove the tank.
Advanced
Joined: Mar 2006
Posts: 66
Likes: 0
From: Youngstown, Ohio
RE: Relocating TURN SIGNALS
I just got an anniversary windshield and kit for my 03 DWG. It is detachable and will only be used on longer rides. In doing so I now have my turn-signals on the forks and I think they look much better there. I would have included a picture but I do not have a digital camera and my scanner broke. [&:]
Thread
Thread Starter
Forum
Replies
Last Post
