quick question
Thread Starter
|
Intermediate
Joined: Jul 2007
Posts: 33
Likes: 0
quick question
Last month I found a pcIII at the local dealer 50% off and this morning I found a set of v&h short shots under the tree woohoo. Tomorrow I am gonna order a big sucker ac. My question what all else do I need to do the install I would like to get it done next week on my day off with as little running around as possible. The bike is a 07 street bob. the only things I can think of that I will need is plugs for the 02 bungs and new exhaust gaskets. thanks for the replies in advance.
Club Member
Joined: Nov 2007
Posts: 4,474
Likes: 6
From: Port Charlotte, Florida
Sounds like he got the PCIII for 50% off good deal. Sounds like you got your bases covered. The AC is easy, the pipes are easy, you will spend most of your time trying to fit the PCIII into the small area under the seat and behind the relay box.
Outstanding HDF Member
Joined: Apr 2006
Posts: 2,555
Likes: 3
From: Clarksburg, PA
Download your map and bump up the rev limit while the PCIII is out of the bike now.
Not sure on your mechanical skill, but this is something that you could do after work...you don't need a whole day to do it.
This way, you have the day off to ride!
Not sure on your mechanical skill, but this is something that you could do after work...you don't need a whole day to do it.
This way, you have the day off to ride!
Club Member
Joined: Feb 2008
Posts: 11,483
Likes: 39
From: Passaic County, NJ
Trending Topics
Ultimate HDF Member
Joined: Oct 2007
Posts: 7,562
Likes: 11
From: Palm Harbor fl.
retaining ring pliers. My big radius required me to re use the stock retaining ring and clamp at the head. gonna need those pliers.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Advanced
Joined: Feb 2008
Posts: 50
Likes: 2
From: United States
Maybe this is a given, but for me it wasn't. An O2 sensor wrench. I thought that I could just use a regular crescent, but it just wound up easier going to Auto Zone to rent the right tool. Otherwise it took me about 3 hours total to install everything.
