Just an experiment to see how this affects the age-old buffeting issue. While I had the tree clamp screws loose, I decided to slide 'em up about an inch to allow the upper windshield clamp to sit atop the upper tree, thereby raising the position of the 'shield. As I was taking the pix after retightening all, it started snowing again, so a roadtest will have to wait. Yes, I know it lowers the front and affects front geometry/handling. It also opens up a big-a$$ gap between the top of the headlight and the cut-out of the 'shield. I'll post a follow-up after I see how it feels going down the road.