Tachometer Options
Road Master
Joined: Jul 2006
Posts: 1,246
Likes: 1
From: T-City, Wa.
RE: Tachometer Options
06fxdbi & WillieC,
That is the best setup I have seenfor the tach! Dam, now I have another project to do.
Again, that is just badazz. Congrads on two very nice scoots.
That is the best setup I have seenfor the tach! Dam, now I have another project to do.
Again, that is just badazz. Congrads on two very nice scoots.
Stage II
Joined: Feb 2007
Posts: 2
Likes: 0
RE: Tachometer Options
jmbear,
what components make up the handlebars, tach and mph gauge? This looks very similar if not exactly like the 07 FDXSE setup. I have been looking for this setup becuase it is clean, and fits me me perfectly.
what components make up the handlebars, tach and mph gauge? This looks very similar if not exactly like the 07 FDXSE setup. I have been looking for this setup becuase it is clean, and fits me me perfectly.
Road Warrior
Joined: Mar 2006
Posts: 1,346
Likes: 3
From: Texarkana, TX
RE: Tachometer Options
These are exactly the same bars and gauge setup off of the 07FXDSE.
John
John
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Here is a few more pics of the setup.
Stellar HDF Member
Joined: Mar 2006
Posts: 2,622
Likes: 7
From: Gulf Coast
RE: Tachometer Options
I was able to mount a 2 and 5/8 Harley tach 68986-04 on my bike. It's not listed to work on a Bob but it will work. Couldn't get it to work at first cause I had the wrong pin to go into the ecm but once I got the right pin,,I went to a small indy shop and with the right crimping tool he installed the new pin and it works perfectly.
Got all the parts used off ebay for about a hundred fifty bucks and have a left over set of risers,base bracket 67128-04 and tach bracket 67676-4 if anybody needs them. Had to use a different bracket with some washers and bent the bracket so the tach housing would clear my windshield.
Good Luck
Tom
[IMG]local://upfiles/8936/D6A0CBF43DB54F02BD2222A5CCF5A1D7.jpg[/IMG]
[IMG]local://upfiles/8936/6DA23E9A5AF04903AAFDC87F7A9F1C8E.jpg[/IMG]
[IMG]local://upfiles/8936/AC700E9C5FC14F3788EAD97A9BD2B58A.jpg[/IMG]
Got all the parts used off ebay for about a hundred fifty bucks and have a left over set of risers,base bracket 67128-04 and tach bracket 67676-4 if anybody needs them. Had to use a different bracket with some washers and bent the bracket so the tach housing would clear my windshield.
Good Luck
Tom
[IMG]local://upfiles/8936/D6A0CBF43DB54F02BD2222A5CCF5A1D7.jpg[/IMG]
[IMG]local://upfiles/8936/6DA23E9A5AF04903AAFDC87F7A9F1C8E.jpg[/IMG]
[IMG]local://upfiles/8936/AC700E9C5FC14F3788EAD97A9BD2B58A.jpg[/IMG]
