Progressive 412s
Road Master
Joined: Sep 2007
Posts: 801
Likes: 62
From: NoVa
The instructions say they come set on the softest setting, which I think is clockwise? I checked and they are adjusted all the way in the one direction, I will try turning them one turn each in the other direction.
Cruiser
Joined: Mar 2009
Posts: 158
Likes: 0
From: Austin, TX
Thanks for the comments guys !!
It lowered the rear about an inch and a half.
The headlight i got off ebay was about 100 bucks i took the guts out it and put in the stock light assembly in it seems to work pretty good.
The black turn signals and tailight are via rattle can haha
Pulling the front end off soon to lower it and get the lowers and trees powder coated and put my gaiters on.
It lowered the rear about an inch and a half.
The headlight i got off ebay was about 100 bucks i took the guts out it and put in the stock light assembly in it seems to work pretty good.
The black turn signals and tailight are via rattle can haha
Pulling the front end off soon to lower it and get the lowers and trees powder coated and put my gaiters on.
I thought the stock shocks were 11". Are you saying it lowered it another 1.5" from stock?
Road Master
Joined: Apr 2008
Posts: 1,107
Likes: 2
From: Carrollton, TX
Quick question, when I go to OneStopMoto.com and look at the 412's the picture they have shows the chrome one with spring covers top and bottom. The black ones only show covers at the top. Do the black 412's only have one cover for some reason?
Thread
Thread Starter
Forum
Replies
Last Post