New bars..............again
Thread Starter
|
Road Captain
Joined: Apr 2009
Posts: 558
Likes: 1
From: Fresno, CA
New bars..............again
Well I decided to order some new bars...........again.
These new ones might just do it for me.
Might.
Here are two teaser pix.............Once I do the wiring and get it all buttoned up I'll post up some nice photo's out of the garage.
MS
These new ones might just do it for me.
Might.
Here are two teaser pix.............Once I do the wiring and get it all buttoned up I'll post up some nice photo's out of the garage.
MS
Last edited by RoadShark; Oct 7, 2009 at 03:10 PM.
Road Captain
Joined: Dec 2007
Posts: 609
Likes: 0
From: North Jersey
Those are gonna be sweet, are they from Licks Cycles? Definitely waiting on the finished pics. I've been thinking about those bars for a while, let us know how that wiring goes with those crazy bends.
Thread Starter
|
Road Captain
Joined: Apr 2009
Posts: 558
Likes: 1
From: Fresno, CA
They shouldn't be all that bad.
I had a 4" rise version of the same bar on first and those were a bitch and I dont know what I was thinkin
These put my hands a few inches above my shoulders and I think they look.............well
I'll button it all up and get good pix in the next day or so.
Could have done it tonight but Mamma was mad that I just came back from a hunting trip and wasn't working on her instead of the Hawg
Had to TCB
I had a 4" rise version of the same bar on first and those were a bitch and I dont know what I was thinkin
These put my hands a few inches above my shoulders and I think they look.............well
I'll button it all up and get good pix in the next day or so.
Could have done it tonight but Mamma was mad that I just came back from a hunting trip and wasn't working on her instead of the Hawg
Had to TCB
Tourer
Joined: Jun 2009
Posts: 275
Likes: 0
Trending Topics
Thread Starter
|
Road Captain
Joined: Apr 2009
Posts: 558
Likes: 1
From: Fresno, CA
Man I dont even know who made them........got them on Ebay from American Classic Motors.
Fatty Z Bars is the description.
Before work today I got the wires pulled, plugged in and made sure all everything works then finished of the right side controls.
At lunch I'll finsih the left side clean it all up and ride it back to work..............I hope
Side note:
Pulling the wires was a breeze.
The bars came with shoe strings run through already so I took my harness and taped it every 4" to keep it all tight then taped the shoe string to the harness and eased them right through. Took about a minute for each side, crazy easy.
Fatty Z Bars is the description.
Before work today I got the wires pulled, plugged in and made sure all everything works then finished of the right side controls.
At lunch I'll finsih the left side clean it all up and ride it back to work..............I hope
Side note:
Pulling the wires was a breeze.
The bars came with shoe strings run through already so I took my harness and taped it every 4" to keep it all tight then taped the shoe string to the harness and eased them right through. Took about a minute for each side, crazy easy.
Last edited by RoadShark; Oct 7, 2009 at 10:45 AM.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
