Wanted : 8 Inch FAT Black Risers
Thread Starter
|
Banned
Joined: Mar 2009
Posts: 2,717
Likes: 1
From: Connecticut / Amsterdam
Risers
Wild1 has 9.5" straight black risers...
http://www.wild1inc.com/orderWO530SB.html
Buy them, cut them down, drill and tap.
http://www.wild1inc.com/orderWO530SB.html
Buy them, cut them down, drill and tap.
I'm not mechanically inclined
Thread Starter
|
Banned
Joined: Mar 2009
Posts: 2,717
Likes: 1
From: Connecticut / Amsterdam
Thread Starter
|
Banned
Joined: Mar 2009
Posts: 2,717
Likes: 1
From: Connecticut / Amsterdam
Risers
too and i like the flat top with the exposed srews ... 
http://www.covingtonscyclecity.com/#scene=Risers
Thread Starter
|
Banned
Joined: Mar 2009
Posts: 2,717
Likes: 1
From: Connecticut / Amsterdam
6 inch rise
Thread Starter
|
Banned
Joined: Mar 2009
Posts: 2,717
Likes: 1
From: Connecticut / Amsterdam
Thank you anyway
You know forgot I had on 6 inch skinny risers ( as a mock up ) the same height as the night train
a couple a weeks ago for my other bars ( sold them ) and the height is right i don't need the 8 the 6 will be fine and they will be the Covingtons , so i'm all set now ! I'm debated what kind of bars yet...
a couple a weeks ago for my other bars ( sold them ) and the height is right i don't need the 8 the 6 will be fine and they will be the Covingtons , so i'm all set now ! I'm debated what kind of bars yet...
Advanced
Joined: Jan 2009
Posts: 60
Likes: 0
From: ROSE TOWN 707
185 bucks for risers?!?! Holy ****! Forget that. Hey man I got a solution for you... Buy 6" black risers off ebay or craigslist, then go down to you nearest metal shop, buy a 2" piece of solid steel stock, take it to a lathe, drill a hole through the center, clean and polish, paint, and BINGO! you got your self some 2" risers that you can add to the 6" ones. Make sure you get longer screws because you have to pass the 2" homemade risers. I did this at the welding shop I work at and it works great.
Last edited by kromer4life; Oct 15, 2009 at 05:18 PM.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo
Thread Starter
|
Banned
Joined: Mar 2009
Posts: 2,717
Likes: 1
From: Connecticut / Amsterdam
Black Risers
185 bucks for risers?!?! Holy ****! Forget that. Hey man I got a solution for you... Buy 6" black risers off ebay or craigslist, then go down to you nearest metal shop, buy a 2" piece of solid steel stock, take it to a lathe, drill a hole through the center, clean and polish, paint, and BINGO! you got your self some 2" risers that you can add to the 6" ones. Make sure you get longer screws because you have to pass the 2" homemade risers. I did this at the welding shop I work at and it works great.
http://cgi.ebay.com/ebaymotors/HARLE...Q5fAccessories