Relocation SUCKS
#22
#23
Not sure about that!! I think I have the same feeling. Definitely post some pics when you get it on especially with profile shots. Event though I can't use anything like that because it will cover up the paint job on the rear fender, but still interested in checking it out.
#24
#25
signal relocate
My saddlebag support used the existing signal mount so what I did was just redrilled the 2 holes for the signals about a inch from the end on the same support bar it was originally mounted on.Looks just like it did from the factory..Just gotta use a sharp punch to strike and dimple the chrome so the drill bit dosen't walk on you..It's a 3/8 hole and I drilled it in increments.First hole 1/16 then 1/8,1/4 then the final 3/8 hole.
#26
Join Date: Feb 2008
Location: Passaic County, NJ
Posts: 11,474
Likes: 0
Received 23 Likes
on
18 Posts
Oh yea I got the detachable hardware there also, just waiting on some button head bolts to look better. And the reason it won't fit on a Dyna fender is the Deluxe, SG, etc have indents on their fender for the mounting points. Since the Dyna doesn't it doesn sit flush and you'll have a weird gap at the bolts, which is why you grind down the light bar a bit. I used a bench grinder.
http://www.fastenal.com/web/home.ex
#29
I don't know if you have a Fastenal near you but they have chrome button heads in stock. It's a great store.
http://www.fastenal.com/web/home.ex
http://www.fastenal.com/web/home.ex
Yea I already went there. They wanted 25 bucks for 5 bolts and I only need two. That's the last resort but a buddy is going to hook me up cause he's got two from when he had the detachables. If that doesn't work out I'll drop the cash!! Thanks!!