Relocation SUCKS

Reply Subscribe

Thread Tools

Search this Thread

#31

12-10-2009, 12:20 AM

JaronB

Ultimate HDF Member

Join Date: Dec 2008

Location: Indiana

Posts: 5,120

Likes: 0

Received 17 Likes on 10 Posts

Quote:

Originally Posted by SC-Longhair

Those prices seem a little out of whack because I was going to order 4 chrome buttonheads for the handlebar clamp and total cost would have been $3.50 from fastenal.

Yea I don't know! I tried to see if they sold them in less quantity but since they don't carry them in that length we had to order them and they won't do it individually. At the hardware store the chrome button heads are only $1.69 each, but they stop right before the size I need. It's all good, I'll get figured out, it's not like I'll be riding anytime soon with the 2 degree weather and snow on its way.

Reply Like

#32

12-10-2009, 08:15 AM

sergeantmajor

Cruiser

Thread Starter

Join Date: Oct 2009

Location: Greece

Posts: 186

Likes: 0

Received 0 Likes on 0 Posts

Quote:

Originally Posted by pitbull1

My saddlebag support used the existing signal mount so what I did was just redrilled the 2 holes for the signals about a inch from the end on the same support bar it was originally mounted on.Looks just like it did from the factory..Just gotta use a sharp punch to strike and dimple the chrome so the drill bit dosen't walk on you..It's a 3/8 hole and I drilled it in increments.First hole 1/16 then 1/8,1/4 then the final 3/8 hole.

That's a good idea!
But...it looks to me after the turn signal there's just not enough strut to drill and put the signal...is there??
Any photos available?

Reply Like

#33

12-10-2009, 09:00 AM

'09fxdb

Tourer

Join Date: Mar 2009

Location: Newfoundland, Canada

Posts: 493

Likes: 0

Received 0 Likes on 0 Posts

Anyone try these??? Small..out of the way.."Cheap".. Would these work?
Hell..they only need to flash, you don't need them to stand out like a badge of honor.
They may even fit on each side of my headlight.

http://cgi.ebay.ca/ws/eBayISAPI.dll?...ht_1229wt_1161

Last edited by '09fxdb; 12-10-2009 at 09:06 AM.

Reply Like

#34

12-10-2009, 09:34 AM

ezriderpgh

Outstanding HDF Member

Join Date: Feb 2008

Location: Pittsburgh, PA

Posts: 2,157

Likes: 0

Received 0 Likes on 0 Posts

Just move the stock lights to the fender and be done with it.

Reply Like

#35

12-10-2009, 08:30 PM

Delmarksman

Tourer

Join Date: Dec 2007

Location: Central DE

Posts: 364

Likes: 0

Received 0 Likes on 0 Posts

Hey Sarge, have you seen my thread?

https://www.hdforums.com/forum/dyna-...-cans-etc.html

Reply Like

#36

12-14-2009, 11:16 AM

pitbull1

Advanced

Join Date: Aug 2006

Location:

Posts: 99

Likes: 0

Received 0 Likes on 0 Posts

Quote:

Originally Posted by sergeantmajor

That's a good idea!
But...it looks to me after the turn signal there's just not enough strut to drill and put the signal...is there??
Any photos available?

There is plenty of room on mine.Here is a pic.Still need to get a buttoncap for the old hole..

Attached Thumbnails