View Poll Results: Winter mods?
Blacken bike out?
8
30.77%
Add more chrome?
2
7.69%
Engine work?
4
15.38%
Upgrade suspension?
2
7.69%
All other mods.
10
38.46%
Voters: 26. You may not vote on this poll
Winter projects?
Ultimate HDF Member
Joined: Oct 2007
Posts: 7,562
Likes: 11
From: Palm Harbor fl.
was going to be nothing. Turned into black Ohlins, black triple trees, new risers, black the rear tail light housing. Also dakota digital in the fuel gauge location. removing idiot lights for some led's.
Outstanding HDF Member
Joined: Jul 2007
Posts: 2,306
Likes: 3
From: Vancouver, BC
I voted black out but its really a hodgpodge of a few things I'm doing........balcking out a few pieces including the lower fork legs (if I can work up the nerve) plus instaling lowering blocks and the Progressive drop in lowering kit for the front
i got 4.
Street bob - full fairing (quick release with stereo and gps) chrome convert to gold, powder tins black chery, 5 in ext on rear fender and glass in tail light, air shocks for touring, convert bagger trunk to work on the bob... setting it up as a full touring bike that can be stripped down to bare bones to rip
FZR600 - street fighter, lots of powder, tune, custom front end... blah blah blah i know most of you are not into rockets (3 week build starts Wed)
CB500 - cafe for the wife, ground up build to her design
CB350 - my bar hopper build, jockey shift, 21 front tire, fish tails, swing arm ext 5 inch, I modded out the frame last fall
Street bob - full fairing (quick release with stereo and gps) chrome convert to gold, powder tins black chery, 5 in ext on rear fender and glass in tail light, air shocks for touring, convert bagger trunk to work on the bob... setting it up as a full touring bike that can be stripped down to bare bones to rip
FZR600 - street fighter, lots of powder, tune, custom front end... blah blah blah i know most of you are not into rockets (3 week build starts Wed)
CB500 - cafe for the wife, ground up build to her design
CB350 - my bar hopper build, jockey shift, 21 front tire, fish tails, swing arm ext 5 inch, I modded out the frame last fall
Ultimate HDF Member
Joined: Oct 2007
Posts: 7,562
Likes: 11
From: Palm Harbor fl.
i got 4.
Street bob - full fairing (quick release with stereo and gps) chrome convert to gold, powder tins black chery, 5 in ext on rear fender and glass in tail light, air shocks for touring, convert bagger trunk to work on the bob... setting it up as a full touring bike that can be stripped down to bare bones to rip
FZR600 - street fighter, lots of powder, tune, custom front end... blah blah blah i know most of you are not into rockets (3 week build starts Wed)
CB500 - cafe for the wife, ground up build to her design
CB350 - my bar hopper build, jockey shift, 21 front tire, fish tails, swing arm ext 5 inch, I modded out the frame last fall
Street bob - full fairing (quick release with stereo and gps) chrome convert to gold, powder tins black chery, 5 in ext on rear fender and glass in tail light, air shocks for touring, convert bagger trunk to work on the bob... setting it up as a full touring bike that can be stripped down to bare bones to rip
FZR600 - street fighter, lots of powder, tune, custom front end... blah blah blah i know most of you are not into rockets (3 week build starts Wed)
CB500 - cafe for the wife, ground up build to her design
CB350 - my bar hopper build, jockey shift, 21 front tire, fish tails, swing arm ext 5 inch, I modded out the frame last fall
Trending Topics
Outstanding HDF Member
Joined: Sep 2008
Posts: 2,408
Likes: 1
From: pottsville,pa
Well I started & finished mine kinda early, but I had my heads ported & polished and went with bigger cams. I was out on Friday getting in some miles before the snow came and can't wait until spring! This thing is nasty!
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo
The Best and Worst Harley-Davidson Moves of 2025
Verdad Gallardo
rounder i also forgot the motor work!!!
doing cams, heads, bore, pushrods... the whole deal. we will see on taking it down to the frame. prob not this winter. maybe next. sometimes i just have to stop and be happy with what i got on it, my bob has been through about 4 makeovers... i want to do this as the final one. we will see, knowing me i will end up wiht the frame in the oven! All depends on what we need to do on the motor. Chad is helping me with that, THANK GOD, cause i would be lost! this will be his 3rd or 4th motor build!
have just about all the parts I need, (cams, push rods, pistons) just need to send my heads away in Jan and get some jugs...
doing cams, heads, bore, pushrods... the whole deal. we will see on taking it down to the frame. prob not this winter. maybe next. sometimes i just have to stop and be happy with what i got on it, my bob has been through about 4 makeovers... i want to do this as the final one. we will see, knowing me i will end up wiht the frame in the oven! All depends on what we need to do on the motor. Chad is helping me with that, THANK GOD, cause i would be lost! this will be his 3rd or 4th motor build!
have just about all the parts I need, (cams, push rods, pistons) just need to send my heads away in Jan and get some jugs...
