Go to my albums I have a drawing there for the spacer, as for the wheel spacers i made my own out of stainless, and for the fender i had to make some for now until i find a wide glide fender. The bike is not complete as i need to powdercoat lower legs this winter, any questions just ask.

 

I almost forgot to mention, the rotor bolts (torx heads) are not available in length more than 1'' so i machined some washers to fit in the recessed area and used grade 8 hex bolts..

 

If you would be so kind as to measure the hub rotor face to rotor face which would tell me exactly what I wish to know. I do not have a FatBob wheel. Thanks. PS, I have no problems getting grade 8 button heads 2 1/2" long for the front rotors (5/16" X 18). Look around.

 

I used stock streetbob wheel, I have the dimensions at home will post them next week, when i get back home

 

yep, same here with the washers but I used cap heads, not a real fan of dome heads

 

​​​