Need signal wiring help.
Thread Starter
|
Stage III
Joined: Aug 2010
Posts: 3
Likes: 0
From: Gray Court, SC
Need signal wiring help.
Hello all, im hoping someone can help me here. I just bought a sweet 2007 Street Bob. Lots of mods.
The previous owner took the turn sigals off. Im not really comfortable with that and want to put them back on.
The rears have a plug and the fronts were cut about 3 inches from the actual signal. I need to find where the wires are stuffed on the bike.
Can anyone point me in the right direction as to where to look on the bike for both the front and rear signal wire sources so I can trace them.
Thanks!
Joe
The previous owner took the turn sigals off. Im not really comfortable with that and want to put them back on.
The rears have a plug and the fronts were cut about 3 inches from the actual signal. I need to find where the wires are stuffed on the bike.
Can anyone point me in the right direction as to where to look on the bike for both the front and rear signal wire sources so I can trace them.
Thanks!
Joe
Thread Starter
|
Stage III
Joined: Aug 2010
Posts: 3
Likes: 0
From: Gray Court, SC
thanks for the reply shadow. Do you know if the front signals come out of the right or left neck side?
Under the seat I seat 2 capped wires. Im thinking that may be the signals but im not getting how the plug part works.
I could really use a picture.
Under the seat I seat 2 capped wires. Im thinking that may be the signals but im not getting how the plug part works.
I could really use a picture.
Thread
Thread Starter
Forum
Replies
Last Post
goblish
General Harley Davidson Chat
4
Nov 15, 2009 11:07 PM
