FXDF-SE Dyno Run ...
Thread Starter
|
Intermediate
Joined: Jun 2010
Posts: 34
Likes: 0
From: SoCal
FXDF-SE Dyno Run ...
When at the dealer today one of the sales peeps asked me if I had seen the dyno results for my bike from when the dealer had this bike as a demo and did the engine mods to it. These results are from the end of April and I bought the bike at the end of May.
Do these numbers sound reasonable and about right for the mods? I don't have any preconceptions of what the results should have been ... just curious. Thanks for any feedback.
Bike:
2009 FXDFSE
110 Cu
SE 259E Pro Twin Cams
D&D 2-1 Fat Cat
PC-V
Quick install pushrods
Dyno Results:
@ Temp 78.41F
@ Baro Press = 29.47 in-HG
@ Humidity = 16%
@ SAE =1.00
CF: SAE Smothing: 5
Max Power = 106.52
Max Torque = 113.92
Do these numbers sound reasonable and about right for the mods? I don't have any preconceptions of what the results should have been ... just curious. Thanks for any feedback.
Bike:
2009 FXDFSE
110 Cu
SE 259E Pro Twin Cams
D&D 2-1 Fat Cat
PC-V
Quick install pushrods
Dyno Results:
@ Temp 78.41F
@ Baro Press = 29.47 in-HG
@ Humidity = 16%
@ SAE =1.00
CF: SAE Smothing: 5
Max Power = 106.52
Max Torque = 113.92
Thread
Thread Starter
Forum
Replies
Last Post
ryan9977
Ignition/Tuner/ECM/Fuel Injection
8
Jun 17, 2015 09:16 AM
