Turn Signal Help
Thread Starter
|
Intermediate
Joined: May 2011
Posts: 38
Likes: 0
From: Montreal
Turn Signals Not Working, Help
I'm in the process of installing baby bullet turn signals and I ran into a little problem. The front signals don't have the blue wire, which seems to be for the runner lights. I figured I could get by without having that wire connected, since I didn't really like having runner lights anyways.
So, when I hit the switch for the flasher, both the front and rear lights turn on and stay lit. Another thing worth mentioning is that both the wires on the new signals are black, so I don't really know if I just have to play around with them until I get the right connection for all four corners.
Has this happened to anyone before, what am I doing wrong?
So, when I hit the switch for the flasher, both the front and rear lights turn on and stay lit. Another thing worth mentioning is that both the wires on the new signals are black, so I don't really know if I just have to play around with them until I get the right connection for all four corners.
Has this happened to anyone before, what am I doing wrong?
Last edited by jaypee; Aug 27, 2011 at 12:24 PM.
Thread
Thread Starter
Forum
Replies
Last Post
skullwizard
Softail Models
1
Apr 15, 2010 09:15 PM
