FatBob Dash Console
Thread Starter
|
Elite HDF Member
Joined: Apr 2008
Posts: 4,718
Likes: 11
From: Back in the Good Ole USA. South Carolina to be exact.
FatBob Dash Console
I like the ignition switch and speedo/tach where they are on my 08 FXDF, but the dash seems a bit high if I look at it from the side.
I've had the dash off several times but I really cant remember what it looks like inside.
Anyone have any thoughts on trimming say a quarter to a half inch all the way around the bottom of the dash IOT to lower it by that much??
I've had the dash off several times but I really cant remember what it looks like inside.
Anyone have any thoughts on trimming say a quarter to a half inch all the way around the bottom of the dash IOT to lower it by that much??
Road Master
Joined: Nov 2010
Posts: 1,115
Likes: 69
From: Bay Area, NorCal
I took pics during my Speedo/Tach install and here's one of the underside of the FB dash - doesn't look to me like there's a whole lot of excess to trim away but I'll let you be the judge....
~
~
Thread
Thread Starter
Forum
Replies
Last Post
